Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

Hi. im installing 2 SSDs to a Kicker Zx2500. Its a stock 120A alt in a Ford Fusion.

I have a Kinetik Hc1400 that will be in the trunk.

My first Question is will I need to have 2 runs(Power/ground) of 0 gauge from the stock battery to the Kinetik? Or can I just run 1 power between both batteries and ground the kinetik to the car?

Also I have a Kicker zx650.4 for the doors and I would like to put Phoenix Gold RSD-6.5CS. MY stock speakers are 5.25s. Would this be too much work or should I just buy the RSDs in 5.25? Also can anyone refer me to a nice pair of 2 way speakers that I could put in the rear doors? I listen to mostly hip-hop/rock.

Any input is great because I receive my Pioneer AVH4000 headunit this week and would like to start my build/box.

Thx

Edited by TooLoud4You

Should only need to run 1 power wire from the front, to the back. Ground the kinetik in the back and the amps to that same point as well.

No clue about the coaxils, the easiest thing to do is use the stock holes and replace the stock speakers...

Watch that 2500 as well, that is a lot of power for the SSD's

Thanks!

-Nick

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.