I'm in the process of attempting to prepare an RL-P18 for a recone but I am having some difficulty with the glue holding the surround and spider down. Really what I'm looking for are tips as to how to get it off, or the best solvents to use.

Most people just use a razor blade to scrape it off.

Once everything is scraped off, grind down the landings to bare metal. Don't forget to cover the motor gap with tape during cleaning. Once clean, use 2-part epoxy or Amazing Goop to glue down the recone kit. Epoxy works great with foam surrounds while Goop works with rubber surrounds.

-Robert

Thanks for the repsonses.

Definately going to get this underway now.

i used a grinder !!!

make sure you put tape over the coil-gap so as not too get stuff in there