have a good one ramos and Justin

<{POST_SNAPBACK}>

Will try , you do the same my brother

morning folks

Wait till you get my age. My idea of sleeping late, is getting up at 7am

<{POST_SNAPBACK}>

I cant wait. Shoudl I get two rolls of raamat or will one be enough? its goin in a small coupe fastback

But im lacking so much in the 60-100Hz area.

<{POST_SNAPBACK}>

Sounds like a driver issue . What drivers are you using ? How much power ? And how / where are they mounted ?

<{POST_SNAPBACK}>

RE 6.5" mids. Im hopeing these drivers im testing will be a big step up.

IB in my doors. Stock location.

The guy is asking 1950 for it but im not going to pay that. It is on a galvanized trailer. Im thinking of offering 1200 and going from there if i like it when i look at it. Any thoughts?

<{POST_SNAPBACK}>

Better be in pristine condition to be that old, and asking that kind of money. I have seen chriscraft's go for that kind of money.

<{POST_SNAPBACK}>

My dad's 29' chriscraft he just bought was $3500 in excelent condition. I might get some pictures one of these days.

Where do you think i should start talking to him at. I dont plan on paying any more than $1300 even with a newer motor and decent trailer.

The guy is asking 1950 for it but im not going to pay that. It is on a galvanized trailer. Im thinking of offering 1200 and going from there if i like it when i look at it. Any thoughts?

<{POST_SNAPBACK}>

Better be in pristine condition to be that old, and asking that kind of money. I have seen chriscraft's go for that kind of money.

<{POST_SNAPBACK}>

My dad's 29' chriscraft he just bought was $3500 in excelent condition. I might get some pictures one of these days.

Where do you think i should start talking to him at. I dont plan on paying any more than $1300 even with a newer motor and decent trailer.

<{POST_SNAPBACK}>

I would start under a grand. Find a middle point you both agree on. I wouldn't go over 11-1200 depending upon condition.

Wait till you get my age. My idea of sleeping late, is getting up at 7am

<{POST_SNAPBACK}>

I cant wait. Shoudl I get two rolls of raamat or will one be enough? its goin in a small coupe fastback

<{POST_SNAPBACK}>

always better to have too much than not enough

morning folks

<{POST_SNAPBACK}>

Morning sir

But im lacking so much in the 60-100Hz area.

<{POST_SNAPBACK}>

Sounds like a driver issue . What drivers are you using ? How much power ? And how / where are they mounted ?

<{POST_SNAPBACK}>

RE 6.5" mids. Im hopeing these drivers im testing will be a big step up.

IB in my doors. Stock location.

<{POST_SNAPBACK}>

Did you do any door treatments ? Dave edwards had the re's for a while in his doors. He had no problems at all with lack of midbass with them

so what goes on today for everyone

Of course he had like 300w on each of them

But im lacking so much in the 60-100Hz area.

<{POST_SNAPBACK}>

Sounds like a driver issue . What drivers are you using ? How much power ? And how / where are they mounted ?

<{POST_SNAPBACK}>

RE 6.5" mids. Im hopeing these drivers im testing will be a big step up.

IB in my doors. Stock location.

<{POST_SNAPBACK}>

Did you do any door treatments ? Dave edwards had the re's for a while in his doors. He had no problems at all with lack of midbass with them

<{POST_SNAPBACK}>

1 layre of second skin on the door skin and 2 on the panel with overkill behind the speaker.

of coruse they are trying to keep up with an ava18 wiht midbass...which might be my problem

Of course he had like 300w on each of them 

<{POST_SNAPBACK}>

i have an IS2080 running the componet with the passive Xover.

The guy is asking 1950 for it but im not going to pay that. It is on a galvanized trailer. Im thinking of offering 1200 and going from there if i like it when i look at it. Any thoughts?

<{POST_SNAPBACK}>

Better be in pristine condition to be that old, and asking that kind of money. I have seen chriscraft's go for that kind of money.

<{POST_SNAPBACK}>

My dad's 29' chriscraft he just bought was $3500 in excelent condition. I might get some pictures one of these days.

Where do you think i should start talking to him at. I dont plan on paying any more than $1300 even with a newer motor and decent trailer.

<{POST_SNAPBACK}>

I would start under a grand. Find a middle point you both agree on. I wouldn't go over 11-1200 depending upon condition.

<{POST_SNAPBACK}>

let me find you a link. Condition is so-so (judgeing form the pics which can make it look worse or better).

http://adcache.boattraderonline.com/6/8/5/83322885.htm

so what goes on today for everyone

<{POST_SNAPBACK}>

work from 12 to 4 then workign on making my car pass inspection

Formula...only company i can find with that name is formula yachts. odd.

I read wrong. OMC=Original Manufacture?

so what goes on today for everyone

<{POST_SNAPBACK}>

work from 12 to 4 then workign on making my car pass inspection

<{POST_SNAPBACK}>

so what goes on today for everyone

<{POST_SNAPBACK}>

work from 12 to 4 then workign on making my car pass inspection

<{POST_SNAPBACK}>

<{POST_SNAPBACK}>

x2

No inspections in FL

everyone has the same schedule? lol

i cannot say that i remember ever having a car of mine inspected aside from emissions

Formula...only company i can find with that name is formula yachts. odd.

I read wrong. OMC=Original Manufacture?

<{POST_SNAPBACK}>

omc= outboard marine corporation

interior looks a little rough . I wouldn't go more than a grand max .

Yeah, the more i look at it the more and more i think that. Lawl at the plywood engine cover.

ill start at $800...if he takes it as a lowball ill give him $1000 firm and he can take it or leave it.

All this assumeing it runs well and the hull is in good shape.

my wiring is on the fedex truck for delivery

Wiring FTW.