mmm...pics.

does anyone have like 2-3sqft deadening mat lying around? i need just enough to cover my horns. i'll pay whatever fair price u feel like charging me. thanks guys.

Clay, buddy.

It melts, buddy

Clay is not going to melt in a vehicle. Temperatures exceeding 200*F, I think not.

you dont come to Arizona much do you?

He doesn't have the extreme heat and direct sunlight where he is now does he? It still won't melt.

does anyone have like 2-3sqft deadening mat lying around? i need just enough to cover my horns. i'll pay whatever fair price u feel like charging me. thanks guys.

Clay, buddy.

It melts, buddy

Clay is not going to melt in a vehicle. Temperatures exceeding 200*F, I think not.

you dont come to Arizona much do you?

He doesn't have the extreme heat and direct sunlight where he is now does he? It still won't melt.

the clay in supa's friend's car melted

yep.

It was in a big blob in liquid form.

However, i think some clay has different peoperties than others.

"Roseart" stuff melts in the sun.

acid, your sig is so fucking big. You should do that on CA.com and continue to yell at people when theres is to big.

does anyone have like 2-3sqft deadening mat lying around? i need just enough to cover my horns. i'll pay whatever fair price u feel like charging me. thanks guys.

<{POST_SNAPBACK}>

Clay, buddy.

<{POST_SNAPBACK}>

It melts, buddy

<{POST_SNAPBACK}>

Clay is not going to melt in a vehicle. Temperatures exceeding 200*F, I think not.

<{POST_SNAPBACK}>

you dont come to Arizona much do you?

<{POST_SNAPBACK}>

He doesn't have the extreme heat and direct sunlight where he is now does he? It still won't melt.

<{POST_SNAPBACK}>

Uhmm, yes I do.

yep.

It was in a big blob in liquid form.

However, i think some clay has different peoperties than others.

"Roseart" stuff melts in the sun.

Damn, you must've got some cheap stuff. The stuff I use took a torch like a champ for about 5 minutes. Maybe I should send some your way.

does anyone have like 2-3sqft deadening mat lying around? i need just enough to cover my horns. i'll pay whatever fair price u feel like charging me. thanks guys.

Clay, buddy.

It melts, buddy

Clay is not going to melt in a vehicle. Temperatures exceeding 200*F, I think not.

you dont come to Arizona much do you?

He doesn't have the extreme heat and direct sunlight where he is now does he? It still won't melt.

Uhmm, yes I do.

You in Death Valley?

yep.

It was in a big blob in liquid form.

However, i think some clay has different peoperties than others.

"Roseart" stuff melts in the sun.

<{POST_SNAPBACK}>

Damn, you must've got some cheap stuff. The stuff I use took a torch like a champ for about 5 minutes. Maybe I should send some your way.

<{POST_SNAPBACK}>

LOL...yes

It was $.97

does anyone have like 2-3sqft deadening mat lying around? i need just enough to cover my horns. i'll pay whatever fair price u feel like charging me. thanks guys.

<{POST_SNAPBACK}>

Clay, buddy.

<{POST_SNAPBACK}>

It melts, buddy

<{POST_SNAPBACK}>

Clay is not going to melt in a vehicle. Temperatures exceeding 200*F, I think not.

<{POST_SNAPBACK}>

you dont come to Arizona much do you?

<{POST_SNAPBACK}>

He doesn't have the extreme heat and direct sunlight where he is now does he? It still won't melt.

<{POST_SNAPBACK}>

Uhmm, yes I do.

<{POST_SNAPBACK}>

You in Death Valley?

<{POST_SNAPBACK}>

No.

Santa Clarita Valley.

Its not as hot as AZ, but it has been as hot as AZ

Ryan, where did you get yours at and how much was it ?

Hopefully i can go to Michaels and get some real stuff

Active kicks ass!!!

Just got through setting up my x-overs and Time alignment.

High-3.15khz 24 db/oct

mid HP-3.15khz 24 db/oct

mid lp-63hz 24 db/oct

Low hp- no amps or subs ATM...

Tweeter amp is an old ass Soundstream D100 50x2 @4ohm

(No clipping )

Mids amp Memphis 16-mc300 150x2 @4ohm

I could do active in my friends car, just need a 4ch instead of his 2ch

steve..DRUM SANDER...not rotary file...

it's basiclly a rubberized barrel that a sandpaper sleeve fits over and u tighten down the nut on the shank ( no good way to say that..lol) to keep the sandpaper on...u can get as course of a grit as u wnat..it'll eat plywood, trust me...lol...

all files suck for wood except extremely rough teeth ones...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Ive used those, they work great.

steve..DRUM SANDER...not rotary file...

it's basiclly a rubberized barrel that a sandpaper sleeve fits over and u tighten down the nut on the shank ( no good way to say that..lol) to keep the sandpaper on...u can get as course of a grit as u wnat..it'll eat plywood, trust me...lol...

all files suck for wood except extremely rough teeth ones...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

I'll have to go pick one of those up for future use then.

I seen it there but I figured that you'd just fly through sandpaper like crazy.

My nut is loose. Please come and crank down on my shank to fix it.

acid, your sig is so fucking big. You should do that on CA.com and continue to yell at people when theres is to big.

this is small compared to some times

that'd be hypocritical and thats just not cool

steve..DRUM SANDER...not rotary file...

it's basiclly a rubberized barrel that a sandpaper sleeve fits over and u tighten down the nut on the shank ( no good way to say that..lol) to keep the sandpaper on...u can get as course of a grit as u wnat..it'll eat plywood, trust me...lol...

all files suck for wood except extremely rough teeth ones...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

My nut is loose. Please come and crank down on my shank to fix it.

hahahhaah ok

Active kicks ass!!!

Just got through setting up my x-overs and Time alignment.

High-3.15khz 24 db/oct

mid HP-3.15khz 24 db/oct

mid lp-63hz 24 db/oct

Low hp- sad.gif no amps or subs ATM...

Tweeter amp is an old ass Soundstream D100 50x2 @4ohm

(No clipping woot.gif )

Mids amp Memphis 16-mc300 150x2 @4ohm

awesome bro, wish I could hear it, but I have to be in Gulf shores the weekend I was suppose to come up. lol

Active kicks ass!!!

Just got through setting up my x-overs and Time alignment.

High-3.15khz 24 db/oct

mid HP-3.15khz 24 db/oct

mid lp-63hz 24 db/oct

Low hp- sad.gif no amps or subs ATM...

Tweeter amp is an old ass Soundstream D100 50x2 @4ohm

(No clipping woot.gif )

Mids amp Memphis 16-mc300 150x2 @4ohm

awesome bro, wish I could hear it, but I have to be in Gulf shores the weekend I was suppose to come up. lol

<{POST_SNAPBACK}>

Its cool, you will get to hear it eventually

rain rainrainra rianrianrianrianrrainrrainrain

/\ TOP

tis true, tis true.

No crap, Fort Smith got hit by ungodlike winds. About tore the gym I was at apart. Trees all over the road, branches and what not.

not sure how much rain we got. It's a good thing I turned off my computer or the storm would have pwned it

omgomgomgomg sooo much rain!