Well i built a sealed box with .6cubes net, its not the output i was expecting. I plan on going to a ported enclosure.

its going in a 2008 frontier and there isnt enough room to have the sub and port up. the sub will be up and the port will be toward the passenger side.

1. port to the driver or passenger side?

2. i read the sticky and it said .5 - 1.2 cubes is it .5 min and 1.2 optimal or any where in between there will work?

3. should i do a longer narrower port or a shorter but wider one?

sub 10" Q

amp - hifonics 1208 (1200w @ 1ohm) (yeah right lol) if i get 1000watts out of it her happy

max 15" high

max 11" wide

max 12" deep

If you ever plan on metering your setup, port to the passenger side. If you don't, port wherever.

1.2^3ft will give you a smoother bass than the smaller box, but use whatever you're comfortable giving up as far as space.

Again, this will depend on your box, but remember to give yourself 12-15sq inches to ever cubic foot.