Posted January 4, 200916 yr Hey guys... I have a build log over at CA.com as well but I'm really getting tired of the childish behavior of the mods around there (I got banned for "joining in '08" along with a bunch of other people) so I decided to come over here to SSA and show you guys what I've been up to the past couple months.At the time of this writing, my setup consists of the following:2 15" Fi Q's (DVC 1ohm, wired to total load of 1 ohm)AQ2200D amp7cuft ported box tuned @ 32Hz - designed by Chris at Fisher Customs, built by meInfinity 475a Reference amp running highs (soon-to-be IDCTX65CS comps, I just need to build the door pods for them. Running some Kenwoods up front for now)All KnuKonceptz 1/0ga wiring, Big3 done in 1/0gaOptima RedTop battery100sqft Damplifier Pro - entire trunk, and two front doors (roof soon to come )Rear deck portOK well I hope you like it if you have any questions or advice then shoot! Here is mah babyPioneer P4000UBLaying out two sheets of 3/4" MDFThe big boy all done One run of 1/0ga and one run of 4ga (It was already there so I just left it in place for the smaller amp)Preliminary fitting Edited January 4, 200916 yr by CadillacMatt
January 4, 200916 yr Author The 15\" next to my old Solo-Baric AQ2200D This is some good stuffDeadening the trunkTesting everything out... looks ugly at this stageCarpeting and the wires for the Big 3The box all wrapped up Edited January 4, 200916 yr by CadillacMatt
January 4, 200916 yr Author Hole in rear deck... needs a little finessing The Big 3... helped out a lotTrunk lid deadenedCarpeting in the trunk finished! WhewTest fitting my amp racksIDCTX65CS comps waiting to be installed!
January 4, 200916 yr Author The box is in there... I turned it around because it was so big the bass was getting choked The amps sittin perdy Below is what I'm currently working on... custom door pods for the ID comps (they won't fit in the doors, and the kicks aren't big enough so I came up with a solution )Prepping the doors for glassingWho's that hard workin man? Done...Stay tuned guys I will keep you all updated! Edited January 4, 200916 yr by CadillacMatt
January 4, 200916 yr i must tell you matt, i was sad to see no updates here... but when i go over to ca and read some topics i would see tons of pics of your build, so lets see more of your work, i was hoping you would call today and come up!! try me sunday, i have some plans but maybe we can work somthing out...... perhaps ill give your first termlab run for free!
January 4, 200916 yr Author i must tell you matt, i was sad to see no updates here... but when i go over to ca and read some topics i would see tons of pics of your build, so lets see more of your work, i was hoping you would call today and come up!! try me sunday, i have some plans but maybe we can work somthing out...... perhaps ill give your first termlab run for free!Yeah man when you said the weekend I was thinking Sunday my bad on that... I changed my oil today, and got some much needed parts for the car... fiberglassed the driver's door...I'll give you a call tomorrow Jon, I actually was going to ask you where I could get metered at because I'm new when it comes to all that stuff but yeah I'll hit you up in the afternoon bro
January 5, 200916 yr lac matt is a cool guy, doing good work, put up a real nice score today! post a pic of your score matt!
January 5, 200916 yr Author Yeah thanks for havin me over tonight Jon, and for settin me up with that TermLab... I managed to hit a 142.3 sealed on the windshield, musical (Put On (slowed)).
January 5, 200916 yr it's cool to see a full size 'linc and 'lac next to each other. nice score's man!
January 5, 200916 yr how did those q's sound bigjon?give me like the next few weeks to get my truck back together and with the new additions and i'd be ready to get metered.
January 5, 200916 yr the Q's sound great! and they got real low! they did sound better then the bl's IMO musicly wise.... but the bls would take abuse and power like a champ!! but i was very suprised with theQ's ear wise the lac was prolly as loud as mine... i was shocked.
January 5, 200916 yr me matt were talking today about getting people togather so you will hear them if and when you come down we all gotta get togather SSA texas chapter
January 5, 200916 yr Author She didn't take too many pictures her memory card was full But yeah if you are ever down here ecromeans come hit us up
January 5, 200916 yr well i love that one pic, the cars look great, next time maybe we can get more pics done, i just enjoy loggin them into my bucket for memorys,, what kinda hours do you work?
January 5, 200916 yr Author well i love that one pic, the cars look great, next time maybe we can get more pics done, i just enjoy loggin them into my bucket for memorys,, what kinda hours do you work?Definitely manM-Th 6am-5pmFri, Sat, and Sun off usually unless we are working overtime.Oh BTW Jon can you shoot me that YouTube link for that little 3" speaker you were telling me about that made the loud bass? Thanks Edited January 5, 200916 yr by CadillacMatt
January 5, 200916 yr http://www.youtube.com/watch?v=Pd-I3KNzK1g...re=channel_page that is one of the vids i told you about.... here is his channel....http://www.youtube.com/user/HexiBase he has a fourm too... but its a lil weird... i would like to buy a blue print from him and use my friend with the shop here in town to build it... or use his shop!
January 5, 200916 yr TeamSSATexas? Big ass cars only? lol that would been cool.. but no one wants to pay the cost to be the boss
January 5, 200916 yr Author Made a little progress on the door pods today.I trimmed/ported/test fit the glass backplate, bored out the speaker holes in the baffles, and rounded the edges. The woofer and tweeter are flush mounted, although the tweet hole needs a little bit more diameter on it which I will do tomorrow.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.