Does anyone have experience with the older and newer Havoc? I bought a 15" Havoc a few years back and now see the Havoc's cone/dust cap has changed. What, if any besides looks, are the differences between the older Havoc and newer one?

Havoc Pic

http://img107.imageshack.us/my.php?image=havoc5er0.jpg

Havoc next to my RE HC

http://img294.imageshack.us/my.php?image=hvshc1vr6.jpg

Thanks for any info.

BAsK

If I am not horribly mistaken, that is an AA Avalanche, not Havoc...

Avalanche 12:

Fs 23 Hz

Vas 80 Liters

Qms 4.36

Qes .39

Qts .358

Znom 4 ohms

Re 2.8 ohms

Mms 197 g

Sd 480 cm^2 - (74.4 sq.in)

Pnom 800 watts

Mounting Depth:

Gasket on - 6 9/16" (6.5625")

Gasket off - 6 11/16" (6.6875")

Avalanche 15:

Qts - .3

Qms - 3.5

Qes - .33

Vas - 300.6 Liters

Fs - 15.7 Hz

Re - 3.2 ohm

Le - 2.4 mH

Xmax - 27mm

800 Watts Rms

Sd 116.09 square inches.

Mounting depth - 7.875" <---- Not sure.

Avalanche 18:

Qts - .4

Qms - 6

Qes - .43

Vas - 550 Liters

Fs - 16 Hz

Re - 3.2 ohm

Le - 2.4 mH

Xmax - 27mm

800 Watts Rms

Sd 187.55 square inches.

Mounting depth:

Gasket on - 9 7/16" (9.4375")

Gasket off - 9 9/16" (9.5625")

http://www.ascendantaudio.com/havoc.php

Edited January 18, 200916 yr by nick_19

All The old AA stuff looked the same. A shot of the motor would be sweet.

I think the new Havoc is a completely different monster, but both are still great speakers. I miagine that the t/s parameters will be different.

It is a Havoc, I'm sure of it. I have the receipt, I purchased it 2/9/06 before it was released at a promotional price. It does look like the Havoc may have been rehauled/redesigned. I'm wondering what the changes are and how the sound of the speaker has changed as a result? ie better sq, more spl...etc?

These are the specs I had written down at the time of purchase. Im not sure if they were the final specs as I bought it before it was released and some of the specs may have changed.

Dual 2 ohm

Re - 1.73 ohms

Qts - .394

Qms - 6.8

Qes - .418

Vas - 106 Liters

Fs - 32 Hz

Le - 1.1 mH

Bl - 20.16

Mms - 244g

Xmax ~25mm

Rms -1500 Watts

Sd 856 - cm^2

Spl - 91.0db

More Pics...

http://img403.imageshack.us/my.php?image=havoc4fp9.jpg

http://img80.imageshack.us/my.php?image=havoc6jd3.jpg

http://img403.imageshack.us/my.php?image=hvshcpz5.jpg

http://img403.imageshack.us/my.php?image=hvshc2yb4.jpg

Thanks for the responses...

BAsK

You have stumped me! Those specs are very different from the 'newer' Havocs'...

Definitely an old Havoc. One of two speakers that I didnt design or OEM for Chad when he owned Ascendant. Chads original goals were his take on a tough daily driving sub. Up until that point his focus was more home audio oriented... until the car audio crowd steered things in a different direction. A solid sub, but not what I wanted for the line. The new Havoc is a much more solid blend of sound quality and durability than the other sub. Looking at the old specs the Xmax is definitely suspect too. Ill have to pull the recone file for that one, but I was thinking more along the lines of 19-20 mm of Xmax with the flatwind that was used.

Thanks,

Scott