Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

ok, so I set out to look for a pair of these subs and wound up with 3 of them. They arrive next week and I am starting to look for some options. I thought of selling one and running two ported off of 2-SQA-1's that I have, but I am increasingly liking the idea of running all three.

I have looked at the Audiopipe AP30001D which according to JBLCAMRY are good for 2600rmsx1@2ohms, but I have also looked at the new Soundstream Dtower which does 1400rmsx1@2ohms.

Just looking for suggestions and seeing where we go from here. I am looking for a great sounding, loud system, and I typically try to do things right the first time so that I do not have to have any worries for 2+ years. reliability is a huge factor and once I install something I usually do not like to upgrade later down the road. The reason I like the AP30001D is it is a lot of power at a decent price and definitely gives me headroom.

4 ohm SVC? Those amps are a LOT of power for those subs. If they are 4 ohm SVC you will be running them @ 1.33 ohms in parallel. An SAE-1200d would be ideal for them. That will give you more than enough headroom

sorry, they are DVC4's...I figured series/parallel I would be at 2.66ohms final load

You really don't need more than ~500w per speaker. So somewhere around 1500w (2000w at most) at 2 ohms should be fine.

Someone over here measured the AP30001 (actually the Massive P3000 but it's the same amp) at almost 3500w at 2 ohms actual load.

I would choose one of those if I had 3 RL-i8s for a 2.66 load

http://www.woofersetc.com/index.cfm?fuseac...;Product_ID=378

http://www.woofersetc.com/index.cfm?fuseac...Product_ID=6667

http://www.woofersetc.com/index.cfm?fuseac...Product_ID=6990

However if you can up the budget, I would go with a SAZ 3000D which can be found for $600 or so used.

Hope that helps,

Kelvin

  • Admin

Kicker 1500.1?

Phoenix Gold 1200.1, I know the tantrum series does 1400+ @ 2-4 ohms.

Chad

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.