Came in the mail today. Gonna get a vid made and try to make a box for it if it doesnt rain too hard this weekend.

Thanks Nick

very cool man

Looks nice.

"When subs were subs ..."

great sub, put it in a massive ported box and sent it about 450, maybe tune in the 28 range

great sub, put it in a massive ported box and sent it about 450, maybe tune in the 28 range

<{POST_SNAPBACK}>

biggest I can go is 2 cubes. GOD DAMN REG CAB!!!!!

great sub, put it in a massive ported box and sent it about 450, maybe tune in the 28 range

biggest I can go is 2 cubes. GOD DAMN REG CAB!!!!!

its a fairly efficent sub, can't streech out the box at all?

great sub, put it in a massive ported box and sent it about 450, maybe tune in the 28 range

<{POST_SNAPBACK}>

biggest I can go is 2 cubes. GOD DAMN REG CAB!!!!!

<{POST_SNAPBACK}>

its a fairly efficent sub, can't streech out the box at all?

<{POST_SNAPBACK}>

mayyyybeeee

Both BBP6 and WinISD say 2 cubes after port and driver displacement @26.08 hz

That sound about right?

I am trying to figure out port area.

Welcome.

Definatly kick ass woofers.

I've had 6 of them over the years, prolly 5-6 single 12" boxes, never dissappointed.

Hmmm.... I lasted used one (not that one ) in 3.5 net tuned to 32 with ~350rms... in the grand am, trunk install.

If you're gonna run 2.0net with a low tuning... Try to squeeze in ~25-30in^2 of port. 35in^2 would be better though.

3.0 with 45in^2 tuned ~30 would make You a happy boy.

-Nick

BTW - in BBP6, it's a Vega (2003).

For some reason ive never taken a liking to CV.

For some reason ive never taken a liking to CV.

Just haven't heard them in a decent install or what?

I think you would like some of their stuff if you like the Shiva ... even the SE.

exactly

Theyre not the prettyest subs either

Pfft ... you could do it

If you have the time.

Pfft ... you could do it

If you have the time.

<{POST_SNAPBACK}>

Time I do have its the knowledge to make it look good that I am worried about.

Q logic makes an 8" enclosure that fits in the console

Q logic makes an 8" enclosure that fits in the console

<{POST_SNAPBACK}>

Nah what I really want to do if I keep this truck for a while is, make the console with the console attached, have the box glassed all the way back and out behind each seat. about 4-5" thick from the back wall so I can have the seats all the way back. I am betting that I could get a good 3-3.5 cubes out of that.

prob can

would be pretty neat-o if you did do that

Dont give some lame ass excuse that you dont have enough knowledge