Posted March 24, 200916 yr so i posted this question in the other forum aswell didnt know witch to put this but i was anting help on these 2 fusion amps i have and was wondern if they are good enough to power 2 15" bls fully loaded here are the specs:Product Specifications465 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N750 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N1150 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+NLinked Power Ratings @14.4VDC1000 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N1800 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+NMax Power Rating: 2000 WattsMax Current: 100AFull Rated Power Distortion (Max) 1kHz: 0.45%THD @ Rated Power 1kHz/100Hz: 0.3%Frequency Response Hz (-3dB): 10Hz - 250HzSignal to Noise: >90Variable Low Pass Filter: 12 dB/OctaveBass Boost @ 45Hz: 12dBInput Sensitivity: 0.2 - 8VInput Impedance: 47KFuse Rating: 25A x 4
March 24, 200916 yr Author can anyone tell me if this amp is good or not or has anyone elt with fusion ams before here are the specs Product Specifications465 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N750 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N1150 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+NLinked Power Ratings @14.4VDC1000 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N1800 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+NMax Power Rating: 2000 WattsMax Current: 100AFull Rated Power Distortion (Max) 1kHz: 0.45%THD @ Rated Power 1kHz/100Hz: 0.3%Frequency Response Hz (-3dB): 10Hz - 250HzSignal to Noise: >90Variable Low Pass Filter: 12 dB/OctaveBass Boost @ 45Hz: 12dBInput Sensitivity: 0.2 - 8VInput Impedance: 47KFuse Rating: 25A x 4
March 24, 200916 yr Kinda strange that they don't double output when linked. Where does the other 500 watts go? But if they give about 1k per sub, that'll work.Also, I merged your threads.
March 24, 200916 yr Author alright and i woldnt be hooking these two amps 2gether so i dnt think i have to worryabout losing the out put power that way. im just hoping these amps will be good to help pump out a high number
March 24, 200916 yr if you have 2 i would run them separately one on each sub, the bl can handle it with the options added no question.oh yeah at 1 ohm each. if those amps run cool enough. Edited March 24, 200916 yr by BoomBoxB
March 24, 200916 yr Author yah i deff would run them to each sub would i have to get a h/o alt or anything upgrade wiring and battery?
March 24, 200916 yr At least big 3 in 1/0 awg and a better battery under the hood, you might be fine after that.
March 24, 200916 yr Author i already have the big 3 done with o/1 and have 2 red tops but i was told i should get a btter alt so i was thinking ohio generator
March 24, 200916 yr if you have 2 batteries you should probably get hi-output alt, otherwise your alt is working its ass off to get the 2 batteries charged.i just got my last one from mechman. Edited March 24, 200916 yr by BoomBoxB
