No description necessary

Sorry bout the mess,my Barracks arent exactly organized I had to shove the boxes in my uniform locker hahaha

Now i just cant decide how to port. i have 7.35^3ft i can either do a huge 8" port and make the enclosure small to get my goal of 6.0 after displacement, or do a huge slot port

Good lookin woofer's

thanks, I seem to think so. I think im going to do a 5.5"x16.75" slot port, that gives me 6.05 after port displacement

do a six inch aero port

a 6" aeroport for a pair of 15s?

i was thinking more along the lines of a single 8" pvc port or a 5.5"x16.75" slot port

Nice!! Just make it simple and go with the slot port...you will be happy I promise!

that works for man, how big would you make it? how many s

A slot port works for me unless box size becomes an issue. how many Sq inch would you make the port? the height will be 16.75" I want to make the port as large as possible which would be 6.5" wide. the box is 39.5 so it would be a very tight squeeze, but i want to move as much air as possible. Mind you I will be running 1000rms(conservatively) was going for 34-38hz tuning, i listen to ALL types of music. but mainly rap or RnB. SQ is not a factor just wanna get ER loud

Ok what i have come up with is 100" of port. Enclosure will be 39.5Wx18.25Hx22.5D with a 6"x16.75"x20"port at 34hz. Anyone agree/disagree?

the only problem i see is when i graphed it on WINISD its showing the sound will drop off tremendously at 36hz and above

Plugged those into the old box calc and they numbers look good to me. So go get building.

gonna be a big box.

yes that is my only concern that is why I was going with a round port in the in the first design, would save me 1.5^ft3.... still might do that if i can figure out how to use winISD and see what one would be loudest 6.0 with a huge slot port or a 8" round port

Nice sub, copycat

I'm porting mine as soon as possible, 3.0 at 30 hz.

Kef

nice subs.