i built a sealed box for this sub .6 cubic feet and it sounds good but it depends on the notes and it just drops off different notes and its loudness lacks majorly im very disappointed in this subwoofer... i have 800 rms going to this sub at 4 ohms and my amp can be wired to 1 ohm at 1600 watts rms and it still sounds like crap? help a brother out.... thanks im at lose and ready to sell the box is air tight its a good box. i m lost ?

Sealed box and loud DO NOT go together. Build a ported box.

designs?

designs?

Max dimensions?

http://www.reaudio.com/speaker_box/LPort_Box_Calc.html

use this to make a box according to Fi specs, which are on their website. for a ported Q 10, .5-1.2 ft^3 with a recommended tuning of 28-33Hz, but I've heard that 32 is the best balance between low end and high output

just make sure that with your dimensions you take into account that you have to slide the box in and out through the trunk opening

i have a 98 chysler concorde the trunk is huge. i mean any size box will work as long as it sounds good a$$ he<<

http://viewmorepics.myspace.com/index.cfm?...mageID=26214279

What are you looking to accomplish with the driver?

and

How good are you box building skills?

second time building box... first ported not the greatest box builder not the worst. going try it out today. i want SQ first off and then spl second

does any one have any anwers?