I recently bought a 15' Bl and had a enclosure in mind. The enclosures dimensions would fit inside my car,

so I went ahead and bought the 15' Bl with the cooling option. It arrived a few days ago and I was super siked.

Then I realized how would I get this box into my 99' Grand Am GT. The box will not fit. (This one http://www.bestbuy.com/site/olspage.jsp?sk...=1218009774927).

Now I'm in a pickle. I have found another box that is ported,that i think

will fit in my car. It is on the small side as far as cubic feet wise though.

link to it --->http://www.bestbuy.com/site/olspage.jsp?skuId=9026797&st=15+in&lp=4&type=product&cp=1&id=1218009790168

Will this box satisfy the needs of this awesome sub?

Any recommendations as far as places that sell enclosures?

In the worst case scenario, could i send this sub (which is still in the box) back?

Ugh...i feel like an idiot

Thanks

thereare many people who build boxes in this forum get ahold of someone in your area and im sure youll be very satisfied..

no that box wont work you need 3 to 5 cubes

maybe if you can post where your from someone may give you a hand and build you a box

I thought about building a box but it kind of seems like a pain in the ass haha

anyone near farmington hills, michigan

that can help me with a enclosure?

there is also this box which does not have a port...http://www.bestbuy.com/site/olspage.jsp?skuId=9027242&st=15+in&lp=3&type=product&cp=1&id=1218009790990

fi doesnt recommend enclosures without ports... anyone know why?

For the same reason that no one running a V8 on a racetrack will recommend replacing dual exhaust with single.

The sub you bought was designed to run in a ported box, NOT a sealed one. Fi does recommend sealed boxes, just not for the BL. Not only that it was designed to run in a ported box of 3cuft - 5cuft for it to perform. Substituting something else will make your purchase a HUGE waste of money as there are other drivers available for other styles of installations.

found a box that should

1) fit in my car

2) it is ported

3) is very close if not 3 cubic feet

http://www.hifisoundconnection.com/Shop/Co...242237244233242

anyone know anything about this site?

Edited June 5, 200916 yr by whatupdoe

found a box that should

1) fit in my car

2) it is ported

3) is very close if not 3 cubic feet

http://www.hifisoundconnection.com/Shop/Co...242237244233242

anyone know anything about this site?

if you can email them and try to figure out the sqin of port and tunning we can tell you if it is worth it otherwise have one built or build your own.......

stay away from prefab boxes. Find some one locally to build a box to your specifications, or try building it yourself. MDF is not that expensive if you mess up your just out of 40 or 50 bucks

stay away from prefab boxes. Find some one locally to build a box to your specifications, or try building it yourself. MDF is not that expensive if you mess up your just out of 40 or 50 bucks

x2

thanks I think i'm going to build my own box.

or like you guys said, go to a local car audio shop

and have them do it for me.