I have an old series1 amp and still like it, however the I took it out of my van and did not notice that the wire diagram came off the bottom and now i don't remember how to wire

I have an old series1 amp and still like it, however the I took it out of my van and did not notice that the wire diagram came off the bottom and now i don't remember how to wire

What are u trying to wire to it?? I was in the archive of rockford and all i seen for manuals were for the Punch, power, and prime.

I have an old series1 amp and still like it, however the I took it out of my van and did not notice that the wire diagram came off the bottom and now i don't remember how to wire

What are u trying to wire to it?? I was in the archive of rockford and all i seen for manuals were for the Punch, power, and prime.

Well I wanted to hook some 10s but the schematic came off the bottom so dont know which is the power, ground or remote the amp is a series 1 4060x. Been all over the net but came up with nothing.

Pull the bottom cover off and it should be labeled on the board. If not, you can easily distinguish it by the traces. IIRC, the power connections were in the middle flanked on either side by the speaker connections.

Here you go right here.

http://www.rockfordfosgate.com/scripts/rightnow.cfg/php.exe/enduser/fattach_get.php?p_sid=NL1SuRCj&p_tbl=9&p_id=388&p_created=1084382485

post a picture of the amp showing the terminal side because I think I may have found a old manual on Rockford Fosgates archive that may help you

well nevermind didnt refresh the window while looking, beat me to the punch

Edited July 15, 200916 yr by jay-cee