Posted July 24, 200916 yr ok want to install my amp but i'm not sure where to put the phase at.i have a SAZ-2000Dshould i just leave it at 0? or where's a good place to put it?i should know what it is. BUT I DON'T :/ maybe i'm missing something here lolthanks!
July 24, 200916 yr leave it at 0 which should be turned all the way to the left. also leave the bass boost off.
July 24, 200916 yr Author leave it at 0 which should be turned all the way to the left. also leave the bass boost off.ok thanksread something about the phase but wasn't sure. and bass boost is always at 0 oh and one more thing since i already started a topicsubsonic? i was gunna put it at like 28hz (my box is tuned to around 33hz)or should i go higher?
July 25, 200916 yr If you go higher with the subsonic you'll start to lose music above the box's tune. I wouldn't go any higher than 28. Maybe even 25.As for phase, that depends entirely on how the sub interacts with your front stage. You set the phase so that the sub is in phase with the interior speakers. This just takes messing with it. It's not a bass boost, gain, or anything. No setting that you put it on will hurt the sub. So just mess with it until it blends the best with the midbass from your other speakers.
July 25, 200916 yr Author did you install the amp today or just getting the settings straight?nah, just getting the settings straight
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.