Posted September 2, 200916 yr When did this happen? It looks like the website was just updated recently. Any chance there are some of the 'old' model ixl 10.2.2 and 12.2.2 with the lower FS kicking around to be purchased? With my application sealed is a lot easier (yes the recommended ported sizes are small, but you still have to get a port in there). I can't do 2.5cubes so the 15.2.2 is out of the question.
September 3, 200916 yr Hang in there. Things are "transitioning" right now. I'm working to match parameters closer to 'decent sealed' and 'decent ported' so folks can be more definitive in their selection.Best,Mark
September 3, 200916 yr Author Hang in there. Things are "transitioning" right now. I'm working to match parameters closer to 'decent sealed' and 'decent ported' so folks can be more definitive in their selection.Best,MarkCool. Thanks for the update Mark.I'll be watching for updates. I'm itching to get a 12.2.2.
September 4, 200916 yr Alrighty. Not sure if you're south of 49 but if you are, order it through SSA... Best,m
September 4, 200916 yr Author Alrighty. Not sure if you're south of 49 but if you are, order it through SSA... Best,mI'm in BC. So ordering from SSA probably isn't the most cost effective way to get my hands on an IXL..
September 7, 200916 yr T/S Parameters IXL 10.2.2 * Fs: 27.8 hz * Re: 3.7 ohms * Qes: 0.46 * Qms: 6.44 * Qts: 0.43 * Mms: 234.1 grams * Rms: 6.34 kg/s * Cms: 0.14 mm/N * Vas: 13.9 litres * Sd: 265.9 cm2 * Xmax: 20 mm (one way linear) * Cone Diameter: cmJono
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.