http://www.ddaudio.com/dd/caraudio/09/DDT.asp

http://www.madisound.com/catalog/product_info.php?products_id=1600

what do you guys think I should cross these tweets and middrivers over at?

Are they a good pair for eachother?

SEAS Prestige CA22RNX (H1288) 8" Coated Paper Cone's are said to play 30hz-3000hz

the ddt tweets say 2000hz-22000hz

not enough info....see your other thread

not enough info....see your other thread

mids will be mounted in the doors in custom pods.

I have no idea about the tweeters...

what is that column called thats between the door and the front window shield?

would it be wise to mount tweeters on that, facing toward the window?

I have no idea what I'm looking for in tweeters, just recommend me something that'll be very loud and clear, and will not fatigue my ears over long periods listening at high volumes.

You know I like punk pop rock

not enough info....see your other thread

mids will be mounted in the doors in custom pods.

I have no idea about the tweeters...

what is that column called thats between the door and the front window shield?

would it be wise to mount tweeters on that, facing toward the window?

I have no idea what I'm looking for in tweeters, just recommend me something that'll be very loud and clear, and will not fatigue my ears over long periods listening at high volumes.

You know I like punk pop rock

Thats called an A-pillar. What is your budget? Have you went to madisound.com or parts-express.com and even looked for some so we can give you feedback? What type of tweeter dome designs do you like?

if you want to fit an 8" in the door id recommend something like what i did. which is use a peerless sls 8" and a 3 inch fullrange. but we need to know what your trying to get out of this set up first.

edit: ignore my suggestion- im rushing abit... like i said we need more info

Edited October 6, 200915 yr by lithium

not enough info....see your other thread

mids will be mounted in the doors in custom pods.

I have no idea about the tweeters...

what is that column called thats between the door and the front window shield?

would it be wise to mount tweeters on that, facing toward the window?

I have no idea what I'm looking for in tweeters, just recommend me something that'll be very loud and clear, and will not fatigue my ears over long periods listening at high volumes.

You know I like punk pop rock

Thats called an A-pillar. What is your budget? Have you went to madisound.com or parts-express.com and even looked for some so we can give you feedback? What type of tweeter dome designs do you like?

I have no idea what kind of tweeters I like, I'm just going to go ahead and guess soft dome (silk), because I see a lot of people like them.

And I was thinking ddt28's for $40 but m5 says no way, so what do you think would be a nice pair of tweets?

I'm looking to spend about $100 for the pair, used if possible. Less $ is better but $100 is the max, whatever gives the best bang for the buck under $100

probably going to be powered by an SAX 100.4

Edited October 6, 200915 yr by socialstealth

First of all dont buy something because everyone else has them and likes them, go to a local car audio shop and listen to their different types of tweeters or check out the websites I mentioned above and SEARCH and the ones that fit your budget and taht you like bring back to this forum. Listen to lithium he makes a good point on using a bigger sized speaker for the upper frequency range, stop trying to get this done all in one nite it wont happen (just take your time and do some research man, stop asking every few seconds what about this one and that one).

if you want to fit an 8" in the door id recommend something like what i did. which is use a peerless sls 8" and a 3 inch fullrange. but we need to know what your trying to get out of this set up first.

edit: ignore my suggestion- im rushing abit... like i said we need more info

I don't do competitions or anything like that, I like punk pop rock music, which has a lot of mid bass. I have a lvl 4 dc sub in a ported box tuned to 32.5 hz in my trunk powered by a sundown SAE1200

I like to listen to loud music. Thats all the systems for, my own (and my passenger's) listening pleasure while I drive. The only other speakers I've heard are coaxils (JL audio evolution vr690cxi, and infinity reference 6822cf).

No audio stores near me...

I can't decide on a 3 way or 2 way front stage. I plan to have it active with a sundown sax100.4 (or 50.4) and, if its a 3 way, I may use my ea eclipse bridged for the midbass driver.

I plan to remake my entire interior, which includes remolding the dash and doors out of fiberglass, so size isn't much of an issue.

Can you point me in the right direction for a tweeter? something pretty 'popular' thats good that I might be able to find used somewhere.

I plan to do this whole thing in steps to achieve a full system in a few months, I'm not going to buy everything tomorrow, so if I need to spend more, i'll have to wait longer till I get more money. If I can spend less, then I can get this done faster and be happier

I'll stop highjacking threads and start looking around for things, sorry about that!

for a first active system do a 2 way.

first option

midbass - 8" or bigger, dedicated midbass (means it plays not much higher then ~300hz at max)

now your required to find something that plays from 250-20k hz

so now you need a full range 2 or 3 inch.

----------------------------

another option

usual 2 way

6.5 or 7 inch mid and a tweeter. (i haven't seen an 8 play up high enough, and beaming would be an issue)

i can plug ssa and mach 5 here and mention the mli 6.5 and match it with a seas tweeter.

The CA22 can mate nice with a full size tweet. For a generic recommendation, I really like the price point and performance of the Peerless HDS.

I also think however that for your goals an 8" midbass and a 3-4" full range would be best; however, you are going to want to get the 3"'er on axis as much as possible. If you can't then I'd stick with the tweet mid and the above combo could work nicely.

The CA22 can mate nice with a full size tweet. For a generic recommendation, I really like the price point and performance of the Peerless HDS.

I also think however that for your goals an 8" midbass and a 3-4" full range would be best; however, you are going to want to get the 3"'er on axis as much as possible. If you can't then I'd stick with the tweet mid and the above combo could work nicely.

so mount them as close as possible to eachother? Not a problem, I can make them right next to eachother in the pods

I'll go for the 3 way, seeing as it seems to fit my style.

the processing unit I mentioned before, the x6, will it support an active 3 way front stage? I'm not sure what crossover options it has (this way i'd be able to use cheaper amps that don't have crossovers)

The 8" sub/midbass and 3" fullrange is still a 2 way. Comment wasn't to mount them as close as possible to each other, but as on axis.