My gf just bought a car and I'm helping her set up a system in it. I have an enclosure for a 15 that is 3.5 cubes tuned to 34hz. Would that be ok for a Level 2 15 being powered by about 500 - 600 watts?

My gf just bought a car and I'm helping her set up a system in it. I have an enclosure for a 15 that is 3.5 cubes tuned to 34hz. Would that be ok for a Level 2 15 being powered by about 500 - 600 watts?

Too much power since they only need 300rms and a smaller box ( I would build a box in its recommended enclosure size or talk to [email protected], and see what he says). just my .02

That is too much power for the lvl 2, especially in that box. A lvl 3 would be perfect though.

That is too much power for the lvl 2, especially in that box. A lvl 3 would be perfect though.

x2, good advice.

You could do a level 2 and just keep the gain down, but I'm with the others. I'd just get a level 3 so that you can use the full potential from the amp. I don't know the prices but I doubt there's too large of a gap between the two?

That is too much power for the lvl 2, especially in that box. A lvl 3 would be perfect though.

x2, good advice.

That size box would be ok for a Level 3? I want to get use out of the box being it was custom made and not cheap. My gf doesnt want alot of power. Just a basic 500 - 600 watt system and wants to use the box we already have.

Edited October 19, 200915 yr by Jysoe

Everybody said that would be a good size box for Level 3, what else do you want us to say for you to believe us.

http://www.dcsoundlab.com/specs.html (do some research, it will help you). Good luck man.

Everybody said that would be a good size box for Level 3, what else do you want us to say for you to believe us.

http://www.dcsoundlab.com/specs.html (do some research, it will help you). Good luck man.

Ok, thanks for the advice

No problem

go lvl 3.

Waaaaaay late to the party.

Waaaaaay late to the party.

I guess some people just choose not to read the whole topic or just want to raise there post count.