I was just wondering which is best on the Fi Btl the dual one, or the dual two, an if order the universal what does it come set as or what? Please help me before i order thanks.

dual 1 and dual 2 depends on what amp you get.

universal lets you change it from dual 2 to dual 1 later on if you want to and vice versa.

Edited October 21, 200915 yr by iputon326

well i got a rockford T1500 amp wired down to 1ohm. so what would you perfer to get? Or is it hard to change out the universal, or what would you recommend ordering?

well i got a rockford T1500 amp wired down to 1ohm. so what would you perfer to get? Or is it hard to change out the universal, or what would you recommend ordering?

get a dual 2 ohm sub that way you can wire it down to a 1 ohm load.

If I Remember Right, If You Get Dual 1ohm Then You Can Wire It Down To .5 Ohms

And If You Get Dual 2 Ohm You Can Either Wire It To 1 Ohm Or 4 Ohms.

Edited October 21, 200915 yr by Kent

I guess you didn't read FI's tech section. https://ssl.perfora.net/www.ficaraudio.com/sess/utn;jsessionid=154ade69df862b0/shopdata/0070_Tech/0070_Speakers/0010_Tech.BTL/product_overview.shopscript

You want the dual 2 with your amp.

I guess you didn't read FI's tech section. https://ssl.perfora.net/www.ficaraudio.com/sess/utn;jsessionid=154ade69df862b0/shopdata/0070_Tech/0070_Speakers/0010_Tech.BTL/product_overview.shopscript

You want the dual 2 with your amp.

[/quoteTh.anks man but i did read it just didn't see anything about that sorry for asking for help thanks to the other guys though for all your help.