Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

has any 1 Sean a berth sheet from a zx1000.1 what was its top rms and @ how many volt's. And are they 1ohm stable

Edited by danstow1

no they are not 1 ohm stable..i dont remember what volts it was but it was 1298 watts rms on my birthsheet.

  • Author

no they are not 1 ohm stable..i dont remember what volts it was but it was 1298 watts rms on my birthsheet.

really they are not 1 ohm stable that kinda sucks where you useing it to run an fi

no they are not 1 ohm stable..i dont remember what volts it was but it was 1298 watts rms on my birthsheet.

really they are not 1 ohm stable that kinda sucks where you useing it to run an fi

Yeah a kicker zx1000.1 is 2 ohms stable (dont worry about what birth sheets say because if you try and run it at that power you will run into clipping (plus they just test one amp out of every 20 or 50 or so and write that number down as all amps birth sheet results). Actually it doesnt suck regardless the company brand your running with it because of its 2 ohm final load, what matters is the voice coil configuration that you have? I wouldnt buy a kicker amp either since they have set SubSonic Filters and you cant adjust them which will require you to tune your enclosure around the sub sonic filter instead of your liking.

  • Author

no they are not 1 ohm stable..i dont remember what volts it was but it was 1298 watts rms on my birthsheet.

really they are not 1 ohm stable that kinda sucks where you useing it to run an fi

Yeah a kicker zx1000.1 is 2 ohms stable (dont worry about what birth sheets say because if you try and run it at that power you will run into clipping (plus they just test one amp out of every 20 or 50 or so and write that number down as all amps birth sheet results). Actually it doesnt suck regardless the company brand your running with it because of its 2 ohm final load, what matters is the voice coil configuration that you have? I wouldnt buy a kicker amp either since they have set SubSonic Filters and you cant adjust them which will require you to tune your enclosure around the sub sonic filter instead of your liking.

so jay Cee what would you sagest to run 2 L5 12's dual 2 ohm

Any amp within both subs rms range or more for headroom, it has to be 2 ohm stable with an adjustable sub sonic filter and underrated that fits inside your budget. What budget are you working with?

The zx 1000 or 1500 should be enough for these 2 subs, if you're set on Kicker.

You just need an amp that can make 1000-1500 watts at 2 Ohms.

If you don't have the sub yet, you can still make another choice.peepwall.gif

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.