Posted June 12, 200520 yr I need feedback and SIN just isn't moving fast enough for me...Da Goods...Taped off and ready for glass...Mold and heavily modified door...The baffle design...I really would appreciate feed back, these will be ported to roughly 60 hz, cause that's where I was told to cut it off...Feed back on the baffle is what I'd like the most as that is where I'm at ATM...Time to go pick up some dowel rods...
June 12, 200520 yr Author The tweeter will be a little higher up and the port closer to the center, but that is all drivers side, so... yeah that's round about how it will be on the mold, except angled and all that standard jazz...
June 13, 200520 yr Author MORE PICTURES!The basic idea...NO THAT IS NOT EVEN CLOSE TO THE PORT I'LL BE USING!Moved it a bit...Kinda where I want it.Big baffle...Some cheesy Pron for you creepy guys...More to come in the following days... again, all comments welcome...just wondering who out of the lot can correctly guess which speaker that is... one guess per person...
June 13, 200520 yr Author thats looking really good!gotta question. how far does the window go down?<{POST_SNAPBACK}>all the way, except the back ones.... stupid half ass windows...
June 13, 200520 yr thats looking really good!gotta question. how far does the window go down?all the way, except the back ones.... stupid half ass windows...ya, the back windows barely go down at all, theyre so half ass
June 13, 200520 yr damn you made those back molds THICK AS HELL...as usual. BUT, they just look EXTRA thick...NG
June 13, 200520 yr Undercover brother line" extra mayo on mine please" ..good lookin on the glass man.I just hope ur makin sure all that stuff is clearing and you still have room.If not i will be like and you'll be like and i'll be like and then you'll be like then i'll be all like and then you'll be all ike then i'll be all like ANd you'll end up like then and i'll be like better luck next time
June 13, 200520 yr Author Undercover brother line" extra mayo on mine please"<{POST_SNAPBACK}> ..good lookin on the glass man.I just hope ur makin sure all that stuff is clearing and you still have room.If not i will be like and you'll be like and i'll be like and then you'll be like then i'll be all like and then you'll be all ike then i'll be all like ANd you'll end up like then and i'll be like better luck next time <{POST_SNAPBACK}>Yes everything clears, these are going to come out way farther than the last ones so I may have to open my door to push my parking brake, but I doubt it, and the door will have to be open to open my hood...When these are done I'm gonna be all like and you're gonna be all like . And then some guy's gonna come in and be like and then I'm gonna then step away from the computer and :dancingsmilie: followed my some more , and then Noah's gonna gome in here like and we're all gonna be like and a couple of people are gonna be like and I'm gonna say " you said " and then I'm gonna go and rockout in my car... and you'll go :yoji:
June 14, 200520 yr Author Mini update!These are what I'll be using for ports...The new baffle... dun dun dun!I know everything is mounted close together, but unless you can think of a good reason why it will affect SQ, I won't be redesinging these baffles. I'm WAY over compensating for these ports just to make 100% sure they aren't close to the enclosure walls when all is said and done.All of the different parts will be connected and curved much like the previous design, hopefully, they will turn out good, cause I don't wanna do this again, lol...FEEDBACK PLEASE... pretty please? with a naked woman on top?
June 14, 200520 yr Author cause the old one just wasn't working, at all, either the tweeter was sitting where it would be blocked by dash, the port was too close to a wall for me to be comfortable, or the port would interfere with the fleece when I stretch it, looking like chit and possibly having negative effects on the airs ability to get through the port noise free...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.