Posted February 10, 201015 yr I got curious and wanted too check out the ohm reading on my sub, so i just disconnected the speaker cable from my amp, then put the probes of my dmm on the the positive and negative cables. The dmm says its wired to 1.8-2.0 ohms. Is this normal? or by some mistake do i have a d4 ohm sub? I have a SS RL-p 18 d2, wired in parallel to my sundown saz1000d. thanks!
February 10, 201015 yr I no you said you have it ran in parallel but are you by any chance still checking one coil or are you checking bot coils together. If you are checking both coils together you have d4 subs but make sure you have both coils together no wires that are not connected
February 10, 201015 yr Author i have one d2 ohm sub wired in parallel in my box, then i checked it by putting the probes on the cable coming out of the box.
February 10, 201015 yr Either one of the coils blew or a wire came loose when installing it. Pull the sub out and check the coils and wiring.
February 10, 201015 yr Author thanks for the help guys. ill pull it out now and see what the problem is.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.