Posted May 21, 201015 yr I was thinking about you guys building me a box for 2 Fi BL 15's. I was thinking 7.5 cubes with a flush port, plexi glass, carpet, and tuned to 34Hz. I wouldn't have to pay shipping because i'm willing to pick the box up since i live in so cal. So how much would this cost?
May 21, 201015 yr double post first you said 8cubes and a whole different post with the same question just more detail this time....BumpGL on the plexi glass dream.
May 21, 201015 yr Author Were you thinking plexi window or the entire enclosure out of plexi?AndrewNo just a little square/rectangle for each sub so you can see the magnet. ohh and i was thinking subs up, port back
May 21, 201015 yr Were you thinking plexi window or the entire enclosure out of plexi?AndrewNo just a little square/rectangle for each sub so you can see the magnet. ohh and i was thinking subs up, port backOk I can do that. What type of SUV is this for? I'm going to need max dimensions so I can get a design rolling for this. Andrew
May 21, 201015 yr Author Were you thinking plexi window or the entire enclosure out of plexi?AndrewNo just a little square/rectangle for each sub so you can see the magnet. ohh and i was thinking subs up, port backOk I can do that. What type of SUV is this for? I'm going to need max dimensions so I can get a design rolling for this. AndrewIt's going in a 4 door JEEP cherokee. Max dimensions 54" from left side to right side. 38" from ground to roof. 31" from back seat to back window. Hope this helps
May 21, 201015 yr Wow thats even wider than my Tahoe!!! I will have a design by tomorrow. How big did you want the plexi window? I can make it just about the whole front of the enclosure Andrew
May 21, 201015 yr Author Wow thats even wider than my Tahoe!!! I will have a design by tomorrow. How big did you want the plexi window? I can make it just about the whole front of the enclosure AndrewIf there is more plexi glass then will it sound worse? if not i would like a window on each side the cover about 1/2 of the front. Oh and take youre time because i'm still working on the money. how much will it cost?
May 21, 201015 yr Author Were you thinking plexi window or the entire enclosure out of plexi?AndrewNo just a little square/rectangle for each sub so you can see the magnet. ohh and i was thinking subs up, port backOk I can do that. What type of SUV is this for? I'm going to need max dimensions so I can get a design rolling for this. AndrewIt's going in a 4 door JEEP cherokee. Max dimensions 54" from left side to right side. 38" from ground to roof. 31" from back seat to back window. Hope this helpssorry typo its actually about 48" from left side to right side. i hope this doesnt screw with your design.
May 21, 201015 yr 48 is more like it since that is what my Tahoe is. Your looking at about $325-$350 ish plus the cost of the plexi which depends heavly on the size. Andrew
May 21, 201015 yr Author 48 is more like it since that is what my Tahoe is. Your looking at about $325-$350 ish plus the cost of the plexi which depends heavly on the size. Andrewis that without shipping?
May 21, 201015 yr 48 is more like it since that is what my Tahoe is. Your looking at about $325-$350 ish plus the cost of the plexi which depends heavly on the size. Andrewis that without shipping?Yes, a 7.5 cube enclosure is very material heavy. Looking at my rough design right now it's more like $300-$325. Andrew
May 21, 201015 yr Author 48 is more like it since that is what my Tahoe is. Your looking at about $325-$350 ish plus the cost of the plexi which depends heavly on the size. Andrewis that without shipping?Yes, a 7.5 cube enclosure is very material heavy. Looking at my rough design right now it's more like $300-$325. Andrewsweet i should be able to get that in a few weeks, so keep me posted, and i'll give you my e-mail.
May 21, 201015 yr Ok sounds good. I only require 25% to get building so if you want I can start to build it and by the time you have the money it should be done. Andrew
May 21, 201015 yr Author Ok sounds good. I only require 25% to get building so if you want I can start to build it and by the time you have the money it should be done. Andrewsweet i'll have it in a month
May 21, 201015 yr Author Ok sounds good. I only require 25% to get building so if you want I can start to build it and by the time you have the money it should be done. Andrewsweet i'll have it in a monthHow much would 25% be?
May 21, 201015 yr Author Also i figured if i give you about $85 that would be approximately 25%. is this ok?
May 23, 201015 yr To get you a perfect quote I need to know how big you want the plexi windows. Andrew
May 23, 201015 yr Author To get you a perfect quote I need to know how big you want the plexi windows. AndrewI just want 2 windows. just enough to see the whole sub for both of them. Its just to show them off to friends and stuff. I don't know how big that'll be though, if you have any idea that's cool but i'll ask nick over at fi and see what he says. Edited May 23, 201015 yr by joe_prince
May 23, 201015 yr Author does this help at all.BL15DUAL 1 | DUAL 2Fs: 33.6 Hz | 33.6 HzRe: 0.7 Ohms/coil | 1.4 Ohms/coilQms: 5.21 | 5.21Qes: .28 | .28Qts: .27 | .27Mms: 261g | 261gCms: 0.86mm/N | 0.86mm/NSd: 810cm^2 | 810cm^2Vas: 78.9 l | 78.9 lSpl: 91.8dB 1W/1m | 91.8dB 1W/1mBl: 16.6 N/A | 22.7 N/AXmax: 18mm | 18mmRms: 1000W * | 1000W *Sealed box: N/A cuft | N/A cuftPorted box: 3-5cuft | 3-5cuftSub OD: 15.625” | 15.625”Cut ID: 14.125” | 14.125”Mounting depth: 8.250” * | 8.250” *Displacement: 0.21cuft * | 0.21cuft * Edited May 23, 201015 yr by joe_prince
May 23, 201015 yr Author i was thinking of the plexi glass windows to look like this. and i wanted the port to be in the middle like that too, just a little smaller.8 Cubes @ 34 hz Pair of 15's- Plexi - SSA Car Audio ForumHope this gives you a better idea.. and this box is 8cubes. i wanted mine to be 7.5cubes.Thanks manhttp://www.soundsolutionsaudio.com/forum/75-Cubes-34-hz-t21381.htmlThis box ^^^ with a little smaller flared port and the plexi windows from the first link. Will this work out? Edited May 23, 201015 yr by joe_prince
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.