so i just wired down my fi q 15 to 1 ohm.. and it hits every note really hard.. and i mean really hard.. but it doesnt sound to clean.. its in a sealed box 2.3 cf could it be because the ohm is set to low? should i have left it at 4 ohms?

you wont hear a difference between 1 ohm and 4, there is probably just too much power going to the sub and its unloading or something. turn the gain down

so i just wired down my fi q 15 to 1 ohm.. and it hits every note really hard.. and i mean really hard.. but it doesnt sound to clean.. its in a sealed box 2.3 cf could it be because the ohm is set to low? should i have left it at 4 ohms?

How did you set your gain on the amp?

true fact!!

you wont hear a difference between 1 ohm and 4, there is probably just too much power going to the sub and its unloading or something. turn the gain down

You shouldn't be able to hear a difference between a 4 ohm and a 1 ohm load. Are you sure your gains are set right?

You're probably driving the sub into distortion. Turn it down before you blow it.

let me check.. ill get back to you guys when i come back from class.. but my bass level is at 0 thats for a fact.. ill get back to you guys soon..

'What amplifier are you using? it may not be 1 ohm stable.