Posted June 7, 201015 yr Looking at a dc audio lvl3 15"- would i be able to get good sq out of this if i put it in a sealed box?
June 7, 201015 yr Yes of course you will, it's all install dependent. You would get good SQ out of a ported box as well.
June 8, 201015 yr Looking at a dc audio lvl3 15"- would i be able to get good sq out of this if i put it in a sealed box?I don't know their price, I've never have a listen to them DC's, but take a look at the store here at SSA. Maybe you can find great deals.The choice is huge in the store.Good luck
June 8, 201015 yr A lvl 3 is basically a RE SE......so they should sound nicely Euhm, wtf. (they maybe look the same on the outside, but i don"t think they are the same on the inside of the motor, and it has differen soft parts)And the Level 3 has more BL and bigger xmax.(and probably more power handling.)Higher BL and more Xmax means it has more potential to get louder.The Re SX has lower Fs, and Lower Qts, which means it has mre potential to sound better.The Dc level 3 will sound good, even real good if u make the right box for it.(and it should be more then loud enough, is it's for SQ...)
June 8, 201015 yr The LVL 2 and LVL 3 both have some great sq too them but after the LVL 3 model you start loosing sq
June 8, 201015 yr A lvl 3 is basically a RE SE......so they should sound nicely Euhm, wtf. (they maybe look the same on the outside, but i don"t think they are the same on the inside of the motor, and it has differen soft parts)And the Level 3 has more BL and bigger xmax.(and probably more power handling.)Higher BL and more Xmax means it has more potential to get louder.The Re SX has lower Fs, and Lower Qts, which means it has mre potential to sound better.The Dc level 3 will sound good, even real good if u make the right box for it.(and it should be more then loud enough, is it's for SQ...)lvl 3....upgraded SE? lvl 4...upgraded MT?
June 8, 201015 yr A lvl 3 is basically a RE SE......so they should sound nicely Euhm, wtf. (they maybe look the same on the outside, but i don"t think they are the same on the inside of the motor, and it has differen soft parts)And the Level 3 has more BL and bigger xmax.(and probably more power handling.)Higher BL and more Xmax means it has more potential to get louder.The Re SX has lower Fs, and Lower Qts, which means it has mre potential to sound better.The Dc level 3 will sound good, even real good if u make the right box for it.(and it should be more then loud enough, is it's for SQ...)lvl 3....upgraded SE? lvl 4...upgraded MT?Upgraded mt?The MT's can handle 3-3.5k watts or even 4k in some hands, the LVL 4 can't.(the level 5 can.)
June 8, 201015 yr A lvl 3 is basically a RE SE......so they should sound nicely Euhm, wtf. (they maybe look the same on the outside, but i don"t think they are the same on the inside of the motor, and it has differen soft parts)And the Level 3 has more BL and bigger xmax.(and probably more power handling.)Higher BL and more Xmax means it has more potential to get louder.The Re SX has lower Fs, and Lower Qts, which means it has mre potential to sound better.The Dc level 3 will sound good, even real good if u make the right box for it.(and it should be more then loud enough, is it's for SQ...)lvl 3....upgraded SE? lvl 4...upgraded MT?Upgraded mt?The MT's can handle 3-3.5k watts or even 4k in some hands, the LVL 4 can't.(the level 5 can.)My bad brah....worded that wrong....i meant XL's
June 9, 201015 yr The Re SX has lower Fs, and Lower Qts, which means it has mre potential to sound better.Umm....what? Not sure how you are arriving at that conclusion or that correlation.
June 9, 201015 yr The Re SX has lower Fs, and Lower Qts, which means it has mre potential to sound better.Umm....what? Not sure how you are arriving at that conclusion or that correlation.Crack?
June 9, 201015 yr A lvl 3 is basically a RE SE......so they should sound nicely Euhm, wtf. (they maybe look the same on the outside, but i don"t think they are the same on the inside of the motor, and it has differen soft parts)And the Level 3 has more BL and bigger xmax.(and probably more power handling.)Higher BL and more Xmax means it has more potential to get louder.The Re SX has lower Fs, and Lower Qts, which means it has mre potential to sound better.The Dc level 3 will sound good, even real good if u make the right box for it.(and it should be more then loud enough, is it's for SQ...)lvl 3....upgraded SE? lvl 4...upgraded MT?Upgraded mt?The MT's can handle 3-3.5k watts or even 4k in some hands, the LVL 4 can't.(the level 5 can.)My bad brah....worded that wrong....i meant XL'sNope even still, the XL has MUCH less motor force, much less power handling, and a MUCH larger gap compared to an MT. RE MT 18"
June 9, 201015 yr Yeah ive been a god damn SSA forum member for over a year and a half and that was my first post ever. BACK OFF!!!!!!!!!!!!!!!!!
June 9, 201015 yr A lvl 3 is basically a RE SE......so they should sound nicely Euhm, wtf. (they maybe look the same on the outside, but i don"t think they are the same on the inside of the motor, and it has differen soft parts)And the Level 3 has more BL and bigger xmax.(and probably more power handling.)Higher BL and more Xmax means it has more potential to get louder.The Re SX has lower Fs, and Lower Qts, which means it has mre potential to sound better.The Dc level 3 will sound good, even real good if u make the right box for it.(and it should be more then loud enough, is it's for SQ...)lvl 3....upgraded SE? lvl 4...upgraded MT?Upgraded mt?The MT's can handle 3-3.5k watts or even 4k in some hands, the LVL 4 can't.(the level 5 can.)Cause it's a big, inefficient waste of ferrite The MT is a solid driver, Scott knows how to design woofers as he's done MANY.
June 9, 201015 yr The Re SX has lower Fs, and Lower Qts, which means it has mre potential to sound better.Umm....what? Not sure how you are arriving at that conclusion or that correlation.Crack? maybe, don't know why i wrote that yesterday.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.