Posted June 9, 201015 yr The 1987 Mustang Build Has Officially Has Begun !Will start the Actual Build tomorrow.Will be getting some help by My bro ElBlako (Member Here on SSA)And maybe a cutie Will have pics up in a little bit of what i got today. Edited June 9, 201015 yr by Kent
June 9, 201015 yr Author First Set of pics !pics of the 87 Mustang that everything will be going in...Rear ShotSide ShotSexy Front Lights Soon to be HID angel EyesHow It looks Now before Back Seat gets Ripped Out
June 9, 201015 yr Author 2nd Batch Of pics, Of The material.Well.... Most Of Itmore pics of new material used in the build will be seen in future Pics Quick Sketchup Of the Electrical. Dont think im planning on using the Solenoid Tho.General overview of the box setupMr Bro and his GF5 Sheets Ready to GoUpcloseWanted to go with Birch but it was $45 a sheet And i needed 5..Basics to any build
June 10, 201015 yr Author Next Set Of Pics !Got my roof deadened today.Before it sounded like a big piece of tin wobbling in the air,after the deadening was SUPER solid.A+ for Second Skin Enough talk, on to the pics.Before i started tearing it down.Getting ready to come off.Bare roof.Had some glue stuff attached but was no problem when it came time for the deadening.Had about a 1 inch gap between the roof and the bracing/steel structure that attached to the roof Down to my last 2 boxesThis stuff is bulletproof !Nice clean full box to start off with First deadening sheet applied !!How it looked when finished. Doubled Everything up. Some spots had Triple where overlapping occurred.
June 10, 201015 yr Author Thanx everyone !will be starting on the false floor today and hopefully starting on sealing the trunk off from the cabinPics will be up of todays progress as the day progresses.\what engine does it have in it? Currently it is Just a 4cyl. id be cheap to find one like it and swap a 302ci or 460 into in. Gauges are just getting the car prepped before the engine swap for those wondering Not sure what output alternator it has tho Edited June 10, 201015 yr by Kent
June 11, 201015 yr Author Started the false floor and backing today.Didn't get an early start and had to limit my window on hours working because the girl im talking to is constantly on my ass for this build log.But.... Going to have this other girl come over tomorrow and help finishing the floor and help me start on the box. Shes a cutie and loves doing all this Ill just turn my phone off and tomorrow should be a smooooth day.Heres The pics for the picture whores This will be fore leveling out the false floor and to give it support.My guide i created.Work with what youve gotPiece cut outText FitPainted and edges tripped For fittingTheres no other as fine as ohh shiney shineGlossy finishFlush with rear deck and all screwed in place.Left holes on either side for runs of 0 gauge to go back to the battery bank and amps.test fitted false floor and layed/trimmed it down.Current status and going to get screwed down and secure when the cutie comes tomorrow
June 11, 201015 yr You got a hot chick that will help you with audio? That's God tier bro....My last one was scared to death of holding the mdf while I made cuts...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.