Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

Taking the subwoofer out from my receiver to a low pass crossover and then to the Soundstream C-1 preamp and onto the Soundstream DA-1 dual monoblock amplifier.

-Soundstream DA-1

Dual monoblock power amplifier

200 watts /channel, 8ohms (continuous power, minimum rms, 20Hz-20kHz, (with less then 0.1% THD)

300 watts/ channel, 4ohms

400 watts bridge, 16ohm

600 watts bridge, 8ohm

Frequency response 20Hz-20kHz +-0.1dB

Bandwidth 2Hz-100kHz

Slew rate greater then 35v/us

Crosstalk greater then -110dB

Signal/Noise, A weighted greater then -110dB

Gain x40, 32dBv

Dynamic Headroom greater then 3dB, 4ohm

Dimensions 5 7/8" x 17" x 14"

Weight 35lbs

Image4.jpg

-Soundstream C-1 pre-amplifier

Input impedance 30k ohms

Input sensitivity less then 100mv for 0.5Vout

Maximum input signal 10Volts

Frequency Response 20Hz-20kHz +-0.1dB

Bandwidth 2Hz-100kHz

THD less than 0.05%

Signal/noise, A-weighter greater then -110dB

Crosstalk greater then -100dB

Maximum Gain 15dB

Headphone ouput Impedance 30 ohms

Main Output Impedance 1000 ohms

Minimum Recommended load 5000 ohms

Maximum Output Level 10 volts

Treble +-8dB, 10kHz

Bass +-10dB, 50Hz

High Cut Filter 8kHz, 6dB/octave

Mute -20dB

Dimensions 3 3/5" x 17" x 11 1/2"

Weight 15lbs

Front.jpg

Elemental Designs 12Kx.2?2

-12" dual voice coil subwoofer

-150/400 power requirement

-Dual 2 ohm coils

Qts: 0.30

Qes : 0.34

Qms : 3.16

Vas : 181.65L

Sd : 545.42 cm^2

Xmag : 12.5mm

Xsus: 18.9mm

Xmax: 12.5mm

MMd: 178g

Re: 2.39

Fs: 17Hz

Bl: 21

025.jpg

010.jpg

6 cube box tuned to roughly 21-23Hz. Hooked up 4 ohms per sub.

normal_DSC01620.jpg

thumb_DSC01624.jpg

normal_DSC02466.jpg

normal_DSC02473.jpg

normal_DSC02477.jpg

My secret glue

normal_DSC01622.jpg

normal_DSC02753.jpg

normal_DSC02765.jpg

normal_DSC02767.jpg

DSC02786.jpg

It replaces this

normal_David_box%20002.jpg

normal_David_box%20006.jpg

normal_David_box%20010.jpg

A couple things...

Sweet flat cones.

Sweet enclosure

HOLY OVER BRACED !!!!!!!!!

Can i have some of that " secret glue" on my hot dog please

that's freakin awesome. Awesome box

I love the secret glue ;)

  • Admin
that's freakin awesome.  Awesome box

I love the secret glue ;)

x2

  • Author

no it won't. I grabbed the wrong tube of caulk. I used some silicone around the subs and that is clear.

I like the low tuning, always a fan of that.

I would like to see a negative response to this project.

Very amazing.

Looks very good.

I just thought that if those woofers were placed in a box that was lacquered to hell and back (like some monitor's are, really glossy) I would come to your home and they'd be leaving with me.

That Soundstream amp looks cool, do you like it?

Very nice setup. That is one sexy box. Might I suggest you get some spreay paint and go over the caulk to make it not stand out so much?

Still a very well built HT substage.

  • Author

I'll post a negative. The paint isn't 100%. I wish I would have used body filler over the entire surface and sanded to get the best possible surface for painting. I would hace also gone with a bedliner time spray on but this is fine if you don't go right up to it under the light.

I also need to put in a port brace since I can almost feel the ouside wall flexing.

Soundstream Amp is nice. I also have the matching C-1 pre-amp and T-1 tuner. The amp is just starting to clip at the maximum I would want to push these. The amp does get real hot when pounding away.

I've been delaying speaker porn and the output mesurements. SOON...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.