Posted September 6, 201015 yr whats up guys and gals....i am installing 2 18" fully loaded btls being pushed by 2 us amps md-3d rated at 2000 dont think power rating for the question matters but oh well..anyway the question i have is how to run the subs on the amps so i can use 1 bass knob from 1 amp and not have to run both...the amps are multilinkable amps just not for sure how to wire...help out thanks alot
September 6, 201015 yr 1) You can strapp(link) your 2 amps, and just set the gains on the master amp. You will have to use only one remote. But be careful with the final ohm load on the amps. !2) you can wire each sub on its own amp, and use the 2 remotes with a simple (phone) connector : this will let you have only one knob (this kind of connectors can be found easily in any electric supply shop.) It's simple and cheap.A friend of mine uses the 2nd solution, but he found that he had to cut/shorten the remote wire because of a loss in output (?!) I can't understand why, but he is happy with the result !Good luck !
September 8, 201015 yr Read your owner's manual on the amps for how to link/strap them.x2 or search and look at the millions of threads on the internet about it as well.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.