I'll have the RL-s in hand towards the end of the first week in December, or sometime into the second week.

I am actively searching out someone in the Miami area that has around 2k RMS on tap at 4 ohm -- should be able to find someone

Now, down to business. Does anyone have some requests as to what boxes I should use?

Right now I am planning the following...

4 Cubes Sealed

3 Cubes Sealed

2 Cubes Sealed

3.5 Cubes Ported, 20hz, 50in^2 Port Area

3.5 Cubes Ported, 25hz, 50in^2 Port Area

3.5 Cubes Ported, 30hz, 50in^2 Port Area

I was sticking with 3.5 Cubes Ported b/c I just can't imagine anything larger for just a 12" driver.

Thoughts, requests, etc?

If I can get my hands on some home audio power...I may do some testing there.

Changed my mind on the ported boxes..

4.5 Cubes NET @ 25hz w/ 40in^2 Port Area

3 Cubes NET @ 31hz w/ 40in^2 Port Area

Will you be doing any measurements, and if so, outdoors to remove the effect of the car?

Thanks

The 2CF sealed is what I am looking for

I don't have anything to measure with :-\.

All I will have is a comparison to two RL-p 15s :-p.

try something super low like mike suggested, say 14Hz. i tried it at 32Hz and it just had an ugly peak.