November 29, 201014 yr Author Well I'm not wanting to go too extreme in this car.. I will have later plans for a spl vehicle. I will measure how much space i have keeping back seats and spare tire. brb with measurementsWithout going all fancy and measuring for a fancy box that would fit perfect over my wheel wells and such, Here is what I have to work with19 3/4" Tall X 34" Deep X 31" Wide
November 29, 201014 yr Well I'm not wanting to go too extreme in this car.. I will have later plans for a spl vehicle. I will measure how much space i have keeping back seats and spare tire. brb with measurementsWithout going all fancy and measuring for a fancy box that would fit perfect over my wheel wells and such, Here is what I have to work with19 3/4" Tall X 34" Deep X 31" WideThe optimal Icon enclosure design I posted above should fit within those dimensions.
November 30, 201014 yr Author k, and also I won some good money playing poker last night, so I'm going to buy a SAE-1200Dv2 :-)
November 30, 201014 yr k, and also I won some good money playing poker last night, so I'm going to buy a SAE-1200Dv2 :-)Sweet! That's a nice amp.
November 30, 201014 yr Author I already ordered the sub though, I ordered the dual 2 ohm. that will still be ok on that amp right? and how would i wire it
November 30, 201014 yr I already ordered the sub though, I ordered the dual 2 ohm. that will still be ok on that amp right? and how would i wire itYeah that's fine. Wire it like this:
November 30, 201014 yr Author OK thanks.. Just to make sure though, http://www.db-r.com is legit right? can anyone vouch for them?
November 30, 201014 yr OK thanks.. Just to make sure though, http://www.db-r.com is legit right? can anyone vouch for them?Yep, there legit. Sundown's official amp repair shop
November 30, 201014 yr Author Double Post FTW, This is a possibility: ICON 15" 4cuft enclosur designThat enclosure will not work, I was just looking at the build sheet, and it's 35" wide.. I Have 31" wide MAX to work with. Nothing over 31" wide will work
December 2, 201014 yr Author WOOT I can't wait!!! I got both my Fi SSd 15 and my Sundown 1200d ordered. Now all I need to do is build the box and I'll be ready to thump again!!
December 2, 201014 yr WOOT I can't wait!!! I got both my Fi SSd 15 and my Sundown 1200d ordered. Now all I need to do is build the box and I'll be ready to thump again!!Give me a call when you wanna come down.we can plan this out.
December 2, 201014 yr Author Where should I go to buy the wood and supplies? (Like where will have the best prices) also will you tell me how much supplies to buy. IE how much wood what kind/how many screws what kind of glue and how much ect...
December 2, 201014 yr Author I have another question for all of you bass heads. I'm kinda curious as to how much of an upgrade this will be from my last system. I had a Memphis M3 15 (( NOT the mojo )) a crossfire vr602 powering it and a prefab box tuned somewhere around 40.The new setup will of course be my sundown 1200d A Fi SSD 15 and a Custom made box tuned to 33 just for the sub.. Im just trying to get an idea of how much louder it will be. LOL i'm getting so impatient to get everything in and installed
December 2, 201014 yr I have another question for all of you bass heads. I'm kinda curious as to how much of an upgrade this will be from my last system. I had a Memphis M3 15 (( NOT the mojo )) a crossfire vr602 powering it and a prefab box tuned somewhere around 40.The new setup will of course be my sundown 1200d A Fi SSD 15 and a Custom made box tuned to 33 just for the sub.. Im just trying to get an idea of how much louder it will be. LOL i'm getting so impatient to get everything in and installedWell, probably quite a bit louder, but it will also sound a lot better. Just remember not to rush it, take your time and do everything the right way the first time around to save you future troubles. Good luck on the install and don't forget to post it in the build logs!
December 2, 201014 yr Author I have another question for all of you bass heads. I'm kinda curious as to how much of an upgrade this will be from my last system. I had a Memphis M3 15 (( NOT the mojo )) a crossfire vr602 powering it and a prefab box tuned somewhere around 40.The new setup will of course be my sundown 1200d A Fi SSD 15 and a Custom made box tuned to 33 just for the sub.. Im just trying to get an idea of how much louder it will be. LOL i'm getting so impatient to get everything in and installedWell, probably quite a bit louder, but it will also sound a lot better. Just remember not to rush it, take your time and do everything the right way the first time around to save you future troubles. Good luck on the install and don't forget to post it in the build logs! No doubt man, I will post in the build logs.And I'm sorry for asking soo many questions but I want to get this done right.. So, In my integra which is a hatchback, what type of box should I build? I was thinking Sub facing up and a back port?
December 2, 201014 yr Where should I go to buy the wood and supplies? (Like where will have the best prices) also will you tell me how much supplies to buy. IE how much wood what kind/how many screws what kind of glue and how much ect...Home Depot sells wood and all the supplies you need. For wood glue get Titebond III and don't forget wood clamps.
December 2, 201014 yr I have another question for all of you bass heads. I'm kinda curious as to how much of an upgrade this will be from my last system. I had a Memphis M3 15 (( NOT the mojo )) a crossfire vr602 powering it and a prefab box tuned somewhere around 40.The new setup will of course be my sundown 1200d A Fi SSD 15 and a Custom made box tuned to 33 just for the sub.. Im just trying to get an idea of how much louder it will be. LOL i'm getting so impatient to get everything in and installedWell, probably quite a bit louder, but it will also sound a lot better. Just remember not to rush it, take your time and do everything the right way the first time around to save you future troubles. Good luck on the install and don't forget to post it in the build logs! No doubt man, I will post in the build logs.And I'm sorry for asking soo many questions but I want to get this done right.. So, In my integra which is a hatchback, what type of box should I build? I was thinking Sub facing up and a back port?Sub up/port back if you have the room. I think that would be the best option.
December 2, 201014 yr Author Where should I go to buy the wood and supplies? (Like where will have the best prices) also will you tell me how much supplies to buy. IE how much wood what kind/how many screws what kind of glue and how much ect...Home Depot sells wood and all the supplies you need. For wood glue get Titebond III and don't forget wood clamps.K thanks.. Also as for box design would fired up and rear port be best in an integra hatch?Edit You must have got your post in right before me lol.. ok thanks. as for a second option if that wont work?I have 30" wide X 32" deep X 19" Tall to work with Edited December 2, 201014 yr by Thekid5678
December 2, 201014 yr Where should I go to buy the wood and supplies? (Like where will have the best prices) also will you tell me how much supplies to buy. IE how much wood what kind/how many screws what kind of glue and how much ect...Home Depot sells wood and all the supplies you need. For wood glue get Titebond III and don't forget wood clamps.K thanks.. Also as for box design would fired up and rear port be best in an integra hatch?Edit You must have got your post in right before me lol.. ok thanks. as for a second option if that wont work?I have 30" wide X 32" deep X 19" Tall to work withWell dam, with that amount of space you have plenty of room to work with. I think the sub up/port back would work perfectly fine.And don't worry about all the questions, that's the best way to learn things. Read and ask. Keep it up.
December 2, 201014 yr Author Where should I go to buy the wood and supplies? (Like where will have the best prices) also will you tell me how much supplies to buy. IE how much wood what kind/how many screws what kind of glue and how much ect...Home Depot sells wood and all the supplies you need. For wood glue get Titebond III and don't forget wood clamps.K thanks.. Also as for box design would fired up and rear port be best in an integra hatch?Edit You must have got your post in right before me lol.. ok thanks. as for a second option if that wont work?I have 30" wide X 32" deep X 19" Tall to work withWell dam, with that amount of space you have plenty of room to work with. I think the sub up/port back would work perfectly fine.And don't worry about all the questions, that's the best way to learn things. Read and ask. Keep it up.Thx for taking your time with me :-)Also Can anyone draw me up some box specs that will fit within those dimensions please?
December 2, 201014 yr Thx for taking your time with me :-)Also Can anyone draw me up some box specs that will fit within those dimensions please?No problem at all, I'm glad to help.Try posting it up in the box fabrication section. I'm sure someone will chime in.
December 2, 201014 yr Author Thx for taking your time with me :-)Also Can anyone draw me up some box specs that will fit within those dimensions please?No problem at all, I'm glad to help.Try posting it up in the box fabrication section. I'm sure someone will chime in.Ok, I posted there. Ill check back here though to see if anyone posts anything in this thread
December 16, 201014 yr Author got the ssd 15 and the sundown 1200d in yesterday. hooked it all up and put it in the prefab box for now just so i could have some beats.. and guess what, my damn head unit went to shit. So here I am again with more questions.. What is a good head unit at a reasonable price? it can be double din or single din, doesnt matter
December 16, 201014 yr got the ssd 15 and the sundown 1200d in yesterday. hooked it all up and put it in the prefab box for now just so i could have some beats.. and guess what, my damn head unit went to shit. So here I am again with more questions.. What is a good head unit at a reasonable price? it can be double din or single din, doesnt matterI vote Kenwood X794. But I'm biased
December 16, 201014 yr Author got the ssd 15 and the sundown 1200d in yesterday. hooked it all up and put it in the prefab box for now just so i could have some beats.. and guess what, my damn head unit went to shit. So here I am again with more questions.. What is a good head unit at a reasonable price? it can be double din or single din, doesnt matterI vote Kenwood X794. But I'm biased pros cons? reasons that you suggested this one?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.