Wanted to do a build and still possibly keep my back seats the max dimensions I have are 38x35x27 didn't want it to go all the way to the roof if possible flared or aero ports is fine tuned btwn 30-34 hrtz

If you could give me the dimension to the top of your rear seats I will try to keep in under that level. And I'm assuming the 38 is width.

Andrew

Yes 38 is the width and top of the seats 28

That 28 includes the head rest of just the top of the seat itself?

Andrew

That 28 includes the head rest of just the top of the seat itself?

Andrew

to the headrest

Ok, do you have a measurement to the top of the seat? I like to design around that as to not obstruct your sight out of your rear view mirror for safety.

Andrew

The highest I can go without obstruction is 20.5 most people seem to recommend 1.5 per sub

Ok I have a design done for you.

I went with 1.75 per sub as Jacob recommends.

Aero ports are going to work great for your application.

38 wide

20 tall

25 deep

7 cubes @ 33 Hz

(2) 6 inch aero ports.

If this looks good let me know and I will get you a price.

Andrew

Sounds great yes please send me a price so its subs up port back

Can you send me a price for the same box?

Your looking at $320 plus shipping. That includes carpet.

Andrew

Hello,

Sorry the the delay in the response, we have moved locations and restructured a bit.

Are you still interested in an enclosure?

Andrew