Id like to say hi to every one since i am new to the forum. I am considering buying 2 Fi SSD 12" and i was wondering which amp would be the best for these subs. Also which gauge wiring would be best and any other things i would need to get the best performance out of these subs.

Installation is going to play a big part. Are you getting a custom enclosure made? Building one, or buying a prefab?

Id go with a good 2000-2500rms amp, depends on your budget as to what brands.... 1/0 wire will be a must, do the big 3 and a 2nd batt and your good to go

Edit* Welcome to the forum by the way

Edited October 11, 201113 yr by hardrock2401

If your on a budget and can't afford to drop $300-400 on an amp and $200 on a battery, then use a smaller amp, they don't need 1000watts each to perform well.

he may not NEED 1k per sub, but who doesnt WANT

Thanks guys on the quick reply's. Im not sure yet on how im getting the box. If i can i will go to Columbus car audio by my house and see if they will build me a box for them. And the 1000 watts a speaker is that rms or max? Also im not new to installing systems but i really havent dealt with big systems like this. So is there any tips and stuff that u guys could give me with installing batteries and wiring and hiding the wires.

Oh and what amp should i get for it like brand, watts, class, etc?

Edited October 11, 201113 yr by Wasted

Thanks guys on the quick reply's. Im not sure yet on how im getting the box. If i can i will go to Columbus car audio by my house and see if they will build me a box for them. And the 1000 watts a speaker is that rms or max? Also im not new to installing systems but i really havent dealt with big systems like this. So is there any tips and stuff that u guys could give me with installing batteries and wiring and hiding the wires.

Oh and what amp should i get for it like brand, watts, class, etc?

1000rms lol, Give us a budget that you are trying to work with...will help us alot in tryin to help u

Make sure you fuse front and back battery. A and L fuse 160 A+ in front and distrib block or same fusing in rear

You may not even need a battery in the trunk. What do you drive? And as previously stated you don't NEED to run 2000 rms.

Welcome to the forum!

Agreed. I say get dual 2s and run them bridged @ 2 ohm. Get a mmats d300hc and you won't need another battery for the 1400W it throws=)