Posted February 3, 200619 yr I have a Power Acoustik A2400DB (1800w rms @1ohm) to push my 15"s. I just want to know if this will work fine with them?
February 4, 200619 yr Author Yes I do. I've had it for about 3mths or so. It seems to do verry good. I had it pushing 3 12" FUBR power acoustik. It was good, but I wanted more SQ and a smaller box.
February 4, 200619 yr if your subs are dual 4 ohms im assuming your running a 2.66 ohm load to you amp by jumping each to to 8 ohms...i had the same amp and it ran at .5 ohm all day month year etc...so wire each dvc 4 ohm sub at 2ohms making a .66 ohm load..(there may be more chance of distortion but you'll get more power) it will handle it finely
February 4, 200619 yr Author Well those subs are now gone to make room for the rl-p 15"s I'll be getting here next week . The 12"s were dual 2ohm each, so I had a load of 1.4 running to this amp with no problems. I just want to make sure that this amp will be "ok" for these subs. Things like enough or not enough power. I know that the 15"s can take alot of power, but I also know that they dont "need" more that 700w rms either.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.