So just bought the ICON-12 D1 along with Audiopipe AP15001D Mono. Was wanting to get a little help on how to wire it all up and everything. Thanks for any help.

give me a sec, ill draw something up.

edit: you know that sub is a dual 1, and your amp puts out 1500rms at 1 ohm which CANNOT be achieved by that coil config.

Edited March 31, 201213 yr by ChevyBoy95

So I should have got the 2ohm?

with 1 sub, yes, the dual 2, so it can be wired down to 1 ohm giving you the full 1500rms. but SSA woofers being efficient and that amp doing 900rms at 2 ohms and the icon being 1250, the 900watts would put less stress on the cars electrical system. it is up to you, but here is the diagram with the sub being wired to 2 ohms.

hope it isnt confusing.

edit: if you bought another you could wire to 1 ohm.... haha.

Edited March 31, 201213 yr by ChevyBoy95

I'll try contacting them to see if they can get it switched around to 2 Ohm. i jsut ordered it a few hours ago so we will see.

Very nice draw up

I'll try contacting them to see if they can get it switched around to 2 Ohm. i jsut ordered it a few hours ago so we will see.

oh that's good, i thought you already had it.

only thing in the diagram you will need to change in the bridge wires.

it would be like this.

_{Thanks man, I will have to check out the images when off work. Won't load on this thing.}

I believe I answered your email and put the change order in. Thanks for picking an Icon.

Welcome ....

Nice buy on the ICON!

thanks aaron and chevyboy for the help. can't wait to get back to the states to hook it all up.

Icon is a great choice.