Posted February 8, 201312 yr Kind of annoying really.The mounting of this amp is impossible with my drill because the screws go so far down in the holeIm gonna have to use a screwdriverThe negative input to the tweeter had the wrong size connector for the crossoverIt was small while the crossover had all large outputswas too small to connect to crossoveri was really hoping to not have any small issues when i went with RF
February 16, 201312 yr Author The tweeter problem is totally their fault. The connectors are too small to fit in the crossover they included with the tweeters. I had 2 cut the connectors and replace with bigger ones. Ok amps my fault I shouldve noticed that the p300.2 is like the only punch with no outputsBut I did not think that would be something I should check forAs Ive never seen an amp without outputs (im young)Whats even the point of not including outputs? save a couple dollars? gtfo. I had 2 buy a longer bit for my drill 2 fit down the amp holes 2 mount (not so bad but grr)
February 16, 201312 yr The new punch stuff sucks imo. I've got a couple of their amps that came with my boat that I'd sell cheap
February 16, 201312 yr Kind of annoying really.The mounting of this amp is impossible with my drill because the screws go so far down in the holeIm gonna have to use a screwdriverThe negative input to the tweeter had the wrong size connector for the crossoverIt was small while the crossover had all large outputswas too small to connect to crossoveri was really hoping to not have any small issues when i went with RFThey make long bits for drills that you can use.
February 16, 201312 yr Author Kind of annoying really.The mounting of this amp is impossible with my drill because the screws go so far down in the holeIm gonna have to use a screwdriverThe negative input to the tweeter had the wrong size connector for the crossoverIt was small while the crossover had all large outputswas too small to connect to crossoveri was really hoping to not have any small issues when i went with RFThey make long bits for drills that you can use. u mustve not read all the posts on this thread, which is bad cause theres only like 5
February 16, 201312 yr Kind of annoying really.The mounting of this amp is impossible with my drill because the screws go so far down in the holeIm gonna have to use a screwdriverThe negative input to the tweeter had the wrong size connector for the crossoverIt was small while the crossover had all large outputswas too small to connect to crossoveri was really hoping to not have any small issues when i went with RFThey make long bits for drills that you can use. u mustve not read all the posts on this thread, which is bad cause theres only like 5Sorry I missed that.
February 16, 201312 yr Author Kind of annoying really.The mounting of this amp is impossible with my drill because the screws go so far down in the holeIm gonna have to use a screwdriverThe negative input to the tweeter had the wrong size connector for the crossoverIt was small while the crossover had all large outputswas too small to connect to crossoveri was really hoping to not have any small issues when i went with RFThey make long bits for drills that you can use. u mustve not read all the posts on this thread, which is bad cause theres only like 5Sorry I missed that. im not sure why but I stared at the dogs in your pic for a whileif they ran as fast as they could head first into eachotherwould they be dalmatians? nvm.
February 16, 201312 yr The tweeter problem is totally their fault. The connectors are too small to fit in the crossover they included with the tweeters. I had 2 cut the connectors and replace with bigger ones. Ok amps my fault I shouldve noticed that the p300.2 is like the only punch with no outputsBut I did not think that would be something I should check forAs Ive never seen an amp without outputs (im young)Whats even the point of not including outputs? save a couple dollars? gtfo. I had 2 buy a longer bit for my drill 2 fit down the amp holes 2 mount (not so bad but grr)Why not use a screwdriver so you will be less likely to damage something?Did you call RF to tell them the connectors don't fit? (I would be surprised if they didn't help you out.)
February 16, 201312 yr im not sure why but I stared at the dogs in your pic for a whileif they ran as fast as they could head first into eachotherwould they be dalmatians? nvm. meh.... Edited February 16, 201312 yr by jay-cee
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.