Im designing my wall for two 18 zcons. Going in an 87 dodge colt lol will have them wired to .7 on an audioque 3500.1. upgrading to a 5k or 7k in near future so keep that in mind.

so far i figure I will have

 

14 ft3 for my subs after all displacements. so 7 cubes each

My port will be 197 sq in tuned to 34.  will be 5.5" x 35 3/4"

roughly 14 sq in per foot. 

 

 

Am i building the box too big? since i plan on upgrading to bigger power should i go smaller? also give opinions on port size and tuning.

or do i stop asking questions and just get it done and find out lol

sounds good to me. With that much port and large volume, and power, I'm willing to bet its going to play some low shit really loud lol

not too large at all.. infact its pretty much dead on with optimal ported  specs

hehe thats the plan. would i be worthy for team ssa then

 how about you install it first.

I had mine around 5.5 cubes each and it did very well.

sounds good to me. Never heard of a dodge colt till now lol funny looking car.

yea its been the cheapest part of the build so far lol. but it should get loud in there. I got materials today, start building tomorrow after work. already have everything prepped, just need to build the box, slide it in place, and seal it off.

have fun "sliding that thing in"

i need to take off the passenger door, but it will slide right in lol

Sounds like this thing is gonna get loud!!! Where in the Midwest are you?

Central Minnesota. but new question, somebody just offered to buy my aq3500.1 and there is a ia 40.1 nearby thats for sale, that ive had my eye on. wondering if that would be a good matchup, or if i should just stick with my plans to get a 7k amp. thinkin a stetsom 7k

Maybe Go a little bit bigger on the port area. get them about 280^2 in of port total. thats why my XCONS are gettin in their ported box 2 18" xcons.