January 23, 201411 yr Author Not sure but I am sagging pretty bad without any equipment so far. Maybe 150 pounds. There's about 8 16 foot 2x4's 1 and half sheets of birch so far and a bunch of expanding foam and polyurethane adhesive. Still have to do front baffle which will eat about 2 sheets of birch and throw in equipment, so looking around the 600-700 pound mark in the end.
January 23, 201411 yr Sounds like you need some help with that rear suspension.Sean ran into a similar problem didn't he? Lol
January 24, 201411 yr i had the right stuff on my last car, just had an issue with leaking. Now, i have custom coil springs. Since i am adding so much extra weight after they were made, if i start to sag, i'll just pull some batts out and special order some stronger ones again and then install those instead.
January 25, 201411 yr Author I also need to do a bunch of work to the rear suspension that is contributing to it sagging more. Needs all new bushings, wheel bearings, brakes, and springs. I may also note it has 2" drop all the way around which isn't helping much either. Edited January 25, 201411 yr by mdizzle5472
January 25, 201411 yr I also need to do a bunch of work to the rear suspension that is contributing to it sagging more. Needs all new bushings, wheel bearings, brakes, and springs. I may also note it has 2" drop all the way around which isn't helping much either.That will not help^LOL!!Hope we get a break in weather soon so you can start finishing that beast up!
January 26, 201411 yr Author I also need to do a bunch of work to the rear suspension that is contributing to it sagging more. Needs all new bushings, wheel bearings, brakes, and springs. I may also note it has 2" drop all the way around which isn't helping much either.That will not help^LOL!!Hope we get a break in weather soon so you can start finishing that beast up!you and me both broths. Although it will probably be like March or April LOL.
January 26, 201411 yr www.coilsprings.com you MUST provide the actual part number for your rear STOCK suspension to them for them to help you. You can search online for this or ask dealership.
January 27, 201411 yr Author www.coilsprings.com you MUST provide the actual part number for your rear STOCK suspension to them for them to help you.You can search online for this or ask dealership.right on thanks bro
February 18, 201411 yr Author UPDATE!!!! Ordered my headunit--- pioneer 80prsGetting recones this weekend.Bought a couple batteries off of Chop yesterday, will be buying 3 more next week. That is all!
February 19, 201411 yr Author Decided to go a different way with substage. Selling one of my nightshades here soon, and a local IAK member is selling bnib sp4 18's. So i decided to take them off his hands. They will be thhe first 4 inch coil sub I have ran, Nightshades would been good, but I told myself a few months ago the only other subs I would run was 2 evils, 4 12" xcons, or sp4's. So sp4's it is.. lol
February 23, 201411 yr Author Going to be bad assI am pretty excited. I am ready for this weather to break so I can do some work to it...
February 27, 201411 yr Author Pics of that battery rack! !!Will try and get a pic tomorrow. I officially have all the equipment for the build as of today. Just need to install it all now and build baffles and amp rack. Pretty excited to get it done.
February 27, 201411 yr Pics of that battery rack! !!Will try and get a pic tomorrow. I officially have all the equipment for the build as of today. Just need to install it all now and build baffles and amp rack. Pretty excited to get it done.Damn Indiana weather isn't going to cooperate :/Happy for you bro! I am eager to hear this beast!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.