August 31, 201312 yr nice build... but im having a hard time swallowing the fact that the gains are at their lowest setting,.....
August 31, 201312 yr nice build... but im having a hard time swallowing the fact that the gains are at their lowest setting,.....+1 to that, I wanna see 25 hz full tilt
August 31, 201312 yr nice build... but im having a hard time swallowing the fact that the gains are at their lowest setting,..... Not saying they are, but showing the gains at min means nothing directly. They could be using a line driver.. They could be using an LC-1 which will overdrive the signal as well.The gains could have been at the 1 o clock position, hehe The HU may have a hefty output voltage. So showing gains alone isn't really saying much.
August 31, 201312 yr I'd like to see but it just keeps loading, and loading, and loading, and loading for me.
September 20, 201311 yr Author nice build... but im having a hard time swallowing the fact that the gains are at their lowest setting,.....+1 to that, I wanna see 25 hz full tiltMy walls not tuned for 25hznice build... but im having a hard time swallowing the fact that the gains are at their lowest setting,.....Not saying they are, but showing the gains at min means nothing directly.They could be using a line driver.. They could be using an LC-1 which will overdrive the signal as well.The gains could have been at the 1 o clock position, heheThe HU may have a hefty output voltage.So showing gains alone isn't really saying much.My headunit has 4 or 5v preouts there's no line driver or LC-1. There's a 360.3 thats flat if you consider that a line driver or to be boosting the signal but I can tell you that after I actually turned the amps up they went up right around the half way mark before distorting Edited September 20, 201311 yr by Real96SS
September 20, 201311 yr Author After turning the amps gain up and still not sealed off and no settings in the 360.3 changed. Enjoy
September 20, 201311 yr Author Looks good, should get louder once broke in. Thanks and hopefully it hppens before next month. I know its going to be louder once I finish sealing the wall off. Looks bonkers. LoL Thanks
October 4, 201311 yr Author Couple new videos of the truck in action. Had alot of fun this past weekend. had a show here in Vegas on Saturday and then drove over to Phoenix for their MECA State Finals. The truck is getting louder and still has a ways to go. Once I max it out where it is now, then I will consider wiring down to see what it does there and if the amps don't protect.
November 13, 201311 yr Author nice truck nice build, would love to hear it in person Ever in Vegas hit me up
December 16, 201311 yr If that shit aint doing 60's you need to wire down man, seriously. Is the wall sealed off from rear? If not you dont know what your missing, whats it tuned to?
December 16, 201311 yr Author If that shit aint doing 60's you need to wire down man, seriously. Is the wall sealed off from rear? If not you dont know what your missing, whats it tuned to? Does a 58.5 Legal on the dash and a 61 Outlaw style. Its wired at .7 right now and thats the lowest I can wire the 9k's without them cutting off. The wall is sealed off and tuning is somewhere between 35-42. Things have changed with the box since it was built. If you checked my scores since my first show, they have all gone up every show. The build surpassed what I wanted so Im not worried if it doesn't do a 60 legal. Pus numbers its doing are at 39hz as opposed to others with similar equipment that does the same number at high 40's and 50's Edited December 16, 201311 yr by Real96SS
December 16, 201311 yr Hell yeah, 61's outlaw are getting it. I retract my statements, lol. Good shit mang
December 16, 201311 yr Author Hell yeah, 61's outlaw are getting it. I retract my statements, lol. Good shit mang I'll post the video of it doing the 61 tomorrow after work on here. Also the 135.7 in MECA park and pound
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.