Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

Hey guys I have a 96 Cherokee Sport, I also have a Warden motor laying around that I want to build into a musical daily ground pounder. Im thinking ill just go with and OEM IA recone and I have an saz3000 to power it.

 

Im just wondering if people have other single woofer set ups like this in Jeeps? What size are you using? Im leaning towards single 15"
 

 

Any pics or vids out there or advice would be great! Thanks

Take some measurements of the space you're willing to sacrifice and post them up here. That will be the deciding factor.

I have a single 18" Fi SSD in a 1989 Cherokee powered by a SAX-1200D. I plan to add another one down the road, but for now it's pretty darn loud.

  • Author

I have a single 18" Fi SSD in a 1989 Cherokee powered by a SAX-1200D. I plan to add another one down the road, but for now it's pretty darn loud.

Have any pics of your set up?

I have a single 18" Fi SSD in a 1989 Cherokee powered by a SAX-1200D. I plan to add another one down the road, but for now it's pretty darn loud.

Have any pics of your set up?

 

Sure:

002irr.jpg

 

 

This was before I had ran my remote wire, that's the black wire sitting there:

001ngd.jpg

 

The plastic grills on my doors have been removed so my woofers are visible (along with their own grills), picture is a little old:

008pui.jpg

 

53h8.jpg

 

Yea, some pics are a little dated but not too much has changed besides the door grills I mentioned and running my remote wire properly. I'm also aware my box says "Sundown Audio" yet I run a Fi SSD. I got the box in a trade (original box I built was 9cuft !), it was built by someone else. Still matches IMO as I run an SAX-1200D.

Edited by hatrix

 

 

I have a single 18" Fi SSD in a 1989 Cherokee powered by a SAX-1200D. I plan to add another one down the road, but for now it's pretty darn loud.

Have any pics of your set up?

 

Sure:

002irr.jpg

 

 

This was before I had ran my remote wire, that's the black wire sitting there:

001ngd.jpg

 

The plastic grills on my doors have been removed so my woofers are visible (along with their own grills), picture is a little old:

008pui.jpg

 

53h8.jpg

 

Yea, some pics are a little dated but not too much has changed besides the door grills I mentioned and running my remote wire properly. I'm also aware my box says "Sundown Audio" yet I run a Fi SSD. I got the box in a trade (original box I built was 9cuft !), it was built by someone else. Still matches IMO as I run an SAX-1200D.

 

 

I hope you cleaned up those power and ground wires going into the Sundown amp.

Edited by jay-cee

 

 

 

I have a single 18" Fi SSD in a 1989 Cherokee powered by a SAX-1200D. I plan to add another one down the road, but for now it's pretty darn loud.

Have any pics of your set up?

 

Sure:

002irr.jpg

 

 

This was before I had ran my remote wire, that's the black wire sitting there:

001ngd.jpg

 

The plastic grills on my doors have been removed so my woofers are visible (along with their own grills), picture is a little old:

008pui.jpg

 

53h8.jpg

 

Yea, some pics are a little dated but not too much has changed besides the door grills I mentioned and running my remote wire properly. I'm also aware my box says "Sundown Audio" yet I run a Fi SSD. I got the box in a trade (original box I built was 9cuft !), it was built by someone else. Still matches IMO as I run an SAX-1200D.

 

 

I hope you cleaned up those power and ground wires going into the Sundown amp.

 

 

I have. I've done a lot of misc cleaning up since most of those pictures, just no big changes. Redid grounds, redid all connections etc.

how many ft3 is that box in the pic?

how many ft3 is that box in the pic?

 

I believe around ~6-6.5 or so. I don't know the exact number unfortunately, a friend got it for me in a trade. Switching from my old 9 cube box, I have a much flatter frequency response. My old box cut off pretty hard above 60hz or so.

Edited by hatrix

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.