I need to replace four of these, but cannot figure out the vales to find the part. Help?

 

 

Is that the only information available on the part?

Is that the only information available on the part?

Yes, I cannot determine how to calculate the values because of the limited information. I know what type it is, and what it does, just can't replace until I find the right ones.

?? http://www.digikey.com/us/en/ph/Epcos/B3279X_series.html

?? http://www.digikey.com/us/en/ph/Epcos/B3279X_series.html

I saw those, but the prongs are wrong on the bottom side.

?? http://www.digikey.com/us/en/ph/Epcos/B3279X_series.html

I saw those, but the prongs are wrong on the bottom side.

Good luck getting a chinese part in the US. Some custom fab is probably a likelihood. Are any of them good?

 

 

?? http://www.digikey.com/us/en/ph/Epcos/B3279X_series.html

I saw those, but the prongs are wrong on the bottom side.

 

Good luck getting a chinese part in the US. Some custom fab is probably a likelihood. Are any of them good?

 

Three are good, but I want to change all four to be safe. I did some more research and the prongs are fine. I just don't know the capacitance rating. 

10UF(:microfarad) with a tolerance of 10%.

If all else fail call

 

http://www.newark.com/

Thank you guys. Now I can get it fixed.

10UF(:microfarad) with a tolerance of 10%.

Would an 8 UF work?

Found some exact caps. Thanks for the help.