Jump to content
View in the app

A better way to browse. Learn more.
SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Strapping two Audiopipe apcl15001d's?

IceBroBass
in Amplifiers / Head Units / Processors / Electrical

Featured Replies

Sure can. Bridge out on master goes to bridge in on the slave. Then just run the neg speaker terminals together and use the Positive from the master for your positive to sub and the positive from the slave to your negative of your sub.

  • Quote
    • 0

    BTW, The master amp controls the settings for both amps once setup correctly. Remember not to bass boost!

  • Quote
    • 0

    No worries, good luck.

  • Quote
    • 0

    i didnt see any instruction of ohm load

  • Quote
    • 1

    i didnt see any instruction of ohm load

     

    Wasn't asked, so it'd make sense that you didn't. :D

  • Quote
    • 0

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Reply to this topic...
    Go to topic listing

    Recently Browsing 0

    • No registered users viewing this page.

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.