I see on the site listings for ported.  Any recommendations on sealed?

I wouldn't recommend it. They like big boxes and alot of port area.

I know this is going to sound bad but we tried an ameican bass dx 10 in a sealed box and it was not bad but then we ported it and in a 1.5 cubic foot box stuffed to make it react like it was in a 2 cubic foot box and gained 10 db haha.  And that was with two 2 inch ports and massive turbulance at 300 rms tuned to like 45 hz

 

 

usermom199599

 

title.... american bass dx 10

 

single 10 dx 135.7 db (that would be a 135.2 on our termlab) 300 rms restricted port

Edited October 1, 201410 yr by insearchofbass

We recommend going ported however if you do want to go sealed the HDS line can do it. Remember you are going to lose out a little on the low end so keep that in mind. For an HDS315 sealed we suggest no smaller than 3^ft.