Cool ass way to elevate the box

Fairly cheap and easy. Cost about 15 bucks

So is this below the window line

What? No second row amp armrest? XS Power armrest instead I see?

I think it's just above window line Iirc. But it's under 25" which is what I need for suv for iasca

Awesome work, Love this build

4 Elites, damn that's serious voltage. 800 amps at idle, damn this will be a demo monster

siiiick

working on the cooling fans

making a platform for the amps

and a platform to raise the amps up to allow the fans below to breath

so with the original baffle we ran into 2 problems, 1 I accidently cut the speaker cut outs a half inch too big and 2 the motors for the front subs was right above the port. So to alleviate that we centered the back 2 subs and moved the front 2 subs back.

also we need an engine hoist to get this thing out and thats without subs.

thats about all i have for updates. will hopefully be able to get more into this in the coming weeks.

Some sexy equipment in this build!   

A I really want to build another box can you pm me via email...

What do you want to know.

You have a Facebook

You have a Facebook

Dont be afraid to ask him on here, I'm pretty sure whatever you need to know could help others on the forum as well.

OP build log is getting better and better, box came out way better than mine

Like Jay cee said I'll help out here as much aS I can

For the old box you had. You said the motors were right above the port? Like blocking the port? Or just covering the back of the sub? What kind of issues would that cause?

The sub was above the port wall. I could barely fit a finger underneath the motor. Thus the vent hole was covered up pretty good. To allow for better cooling I moved those subs back so there is a good 5 inches or so behind the motor

The sub was above the port wall. I could barely fit a finger underneath the motor. Thus the vent hole was covered up pretty good. To allow for better cooling I moved those subs back so there is a good 5 inches or so behind the motor

Thanks for clearing that up for me. Was just asking because my box for my zcon is similar to the way you described.

Iirc the zcon doesn't have a pole vent. So you should be perfectly fine.

Iirc the zcon doesn't have a pole vent. So you should be perfectly fine.

Nah it doesn't have one. So I'm good. Thats why i was asking incase there was a different reason you changed your box.

nice work!!

Made a center console for the rear buckets to house the batteries. Also has a cupholder and a usb/lighter plug in.

B2 hn6 pa mids and id horns.

Hows the build

Ahh I love b2 idk what it is but I find it hard not be drawn to their products. How do you like the b2 mids?