Posted March 28, 200421 yr here's a few pics of a standard cab s10 install i did saturday..it's a single 12" he2 bieng pushed by a modded profile california 1200..benched over 880wrms..in a 2.25ft^3 ported enclosure tuned to 34hz...it's kinda cramped, but u can still get to the jack..hehealso, this thing sounds great and hits hard as frock...wheeeeeeeeeeeeeeeeeeeeeeeeeeeee Edited March 28, 200421 yr by mrray13
March 28, 200421 yr Author first pic above was a trial fit....here's one of the box done..but no sub....the lip off to the side will soon be the amp rack....wheeeeeeeeeeeeeeeeeeeeeeeeeeeeee
March 28, 200421 yr Author almost the same pic as bove..but with the sub in....u can also see the port in the upper passanger side.(left side in the pic)wheeeeeeeeeeeeeeeeeeeeeeeeeeeee Edited March 28, 200421 yr by mrray13
March 28, 200421 yr Author here's one in the truck..no seat.....but hooked upu can also see how it goes around the jack...hehewheeeeeeeeeeeeeeeeeeeeeeeeee Edited March 28, 200421 yr by mrray13
March 28, 200421 yr Author and finally...with the seats in.....does this count as post whoring??!?!?!hehehehhahaahhahehelet me know what y'all thinkwheeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
March 28, 200421 yr Author well...one more....passanger side of totally finished( for me anyway) set-up...here u can see where the port is located..man, i'm not shittin ya on how good this thing sounds and how loud it gets...it impressed my wife( in the above photo helping me cleanup)..and that ain't easy to dowheeeeeeeeeeeeeeeeeeeee
March 28, 200421 yr Author I like the custom fit wood work. That amp is looking large. that's cuz that amp IS large...hehe2"tallx 10"widex 24" long!!here is a link to the soundomain page i just put up for it.....s-10 installenjoy and don't forget to vote for it...wheeeeeeeeeeeeeeeeeeeeeeeeeeeeee
March 28, 200421 yr Looks very good! Get a finish on that box though. I actually like that amp too. I like the finish and the clean lines. What about the front stage?
March 29, 200421 yr Author Looks very good! Get a finish on that box though. I actually like that amp too. I like the finish and the clean lines. What about the front stage? the owner's boyfriend wants to carpet the box...hence i didn't need to finish it.as too the front stage...it's factory, being pushed by a sony cdx-m630 h/u with internal -xovers set at the 125 hz level. the factory 4x6 plates are so harsh i faded the h/u almost all the way to the "rear" 6.5's in the doors. the dash speakers add just enuff to enjoy the vocals clearly...thnx for all the compliments...this truck really turned out nice, all the way to the surprising response from the sub and box! and i really like the way the amp rack turned out...with the amp being as long as the box is tall, there really wasn't much choice as to where it could go...so i ran it parallel with the rake of the box and flush with the baffle. all of it turned out better then expected!and the old rf's do indeed kick ass!one more thing....can u guess it?if ya guessed.......wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeee (u was right..hehe)
March 29, 200421 yr Author here's a pic of the sub being worked over while i was tweaking the thing...my son took this...oh yeah...from start to finish....wiring, designing, building and installing....8.5 hrs flying solo......i think that it went pretty good..wheeeeeeeeeeeeeeeeeeeeeeeeeeee
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.