I recently bought a recone for my HCCA 15 and I think the leads are too short for me to use. Is it usual for the leads to only go past the spider by 1"? Let me know what I can do about this. I have included a couple pics so you can see what I am talking about.

Thanks!

ummmmm...they might be ok

I'm not sure how long the coil is though...

see if the cone in the forward position will pull on them or not

ummmmm...they might be ok

I'm not sure how long the coil is though...

see if the cone in the forward position will pull on them or not

I cant really check that properly because the recone isnt glued in yet. Honestly I dont see how they would work, just judging bay all the other woofers I have. Most of the tensils curve before getting to the post. In the pics I posted it hard to tell but the tensils are straight. Hope this clears it up a little more. Is there any way of extending them?

They are too short for that style of terminal.

Please email me at [email protected] and give me your address (I have sent out 3-4 HCCA recones recently) and Ill send you out some of our terminals to use.

Thanks...

Scott

Thanks Scott! You rock and NDMstang65, thanks for the quick response.

Josh

No problem man