Scott, any updates on finding a proper fitting coil? let me know. Thanks, Matt

Found 1 coil thatll work, but Im looking for something a little beefier as this one I kind of think is too puny to use.

Im still looking

Thanks,

Scott

Found 1 coil thatll work, but Im looking for something a little beefier as this one I kind of think is too puny to use.

Im still looking

Thanks,

Scott

Right on.. I hope you're not charging me for all this extra work!?!

lol... nope

Scott, if impedance is the problem in finding a proper coil, then I wouldn't mind a dual 1 ohm coil. Thanks, Matt

Impedance isnt really the problem... its the motor dimensions. They use a VERY tight pole piece and our standard 3.000" ID coils are too tight. They slide on, but with about .003-.005" clerance per side. I am looking for a 3.018" ID coil (which is the other US standard size). Even at that, it will still be only .012-.014" per side which is tighter than the SPL version of the BTL. Seems they either used a Chinese coil with a larger ID, or they run them way too tight for a normal daily setup.

Thanks,

Scott

Impedance isnt really the problem... its the motor dimensions. They use a VERY tight pole piece and our standard 3.000" ID coils are too tight. They slide on, but with about .003-.005" clerance per side. I am looking for a 3.018" ID coil (which is the other US standard size). Even at that, it will still be only .012-.014" per side which is tighter than the SPL version of the BTL. Seems they either used a Chinese coil with a larger ID, or they run them way too tight for a normal daily setup.

Thanks,

Scott

Oh dayummmm.. I don't want to lose out on a motor and the 40 bucks it cost me to ship it.. but I may just have to chalk this one up as a loss..

Edited March 1, 200718 yr by PsychoTheRapist

Scott, nevermind on the crossfire recone because now you can start working on my 15" BL's...

p.s. Oh and I want stickers, lots and lots of stickers. lol

hate to dig up an old post, but did anyone ever find a coil/former to fit the older Crossfire XT15's? I have 2 of the good old XT15F series that I would like to recone.

hate to dig up an old post, but did anyone ever find a coil/former to fit the older Crossfire XT15's? I have 2 of the good old XT15F series that I would like to recone.

I recently emailed Scott about getting my XT motor back, even though he's had it for almost a year and a half. lol. Hopefully he will respond within the next coming weeks whether he has it and can find a coil to recone it.

Edited June 21, 200817 yr by PsychoTheRapist

Sorry man been working a LOT of long hours at my other 'summer job'...been hell to say the least.

None the less things have changed, we still have your motor and we have a coil that will now fit it if you are interested in a recone..

Let me know, i'll be on here tonight hopefully after daylight and get things taken care of.

Thanks!

-Nick

Sorry man been working a LOT of long hours at my other 'summer job'...been hell to say the least.

None the less things have changed, we still have your motor and we have a coil that will now fit it if you are interested in a recone..

Let me know, i'll be on here tonight hopefully after daylight and get things taken care of.

Thanks!

-Nick

Hells yeah, I'm interested. Let me know the price on a 12" D1 recone + shipping and I'll PP it over.

I would like to get a price on (2) XT15F recones - what coil config can you get? Dual 1.4's?

Edited June 23, 200817 yr by redlineaudio

Ttt

Nick, my email is blownatmosphere (at) hotmail (dot) com, please email me a price quote for a 12" d1 recone, plus exact shipping of the reconed sub to 48430.

Thanks,

Matt

Ttt for redline and myself.

Nick, my email is blownatmosphere (at) hotmail (dot) com, please email me a price quote for a 12" d1 recone, plus exact shipping of the reconed sub to 48430.

Thanks,

Matt

Don't know how much the motor weighs off the top of my head so i can't do a 'shipped' price until tomorrow when I get in touch with Scott. 12" recone with basket and everything is $108 plus shipping.

Thanks!

-Nick

I would like to get a price on (2) XT15F recones - what coil config can you get? Dual 1.4's?

Yes..

Each 15" recone is $85 + shipping to where you are (need a zip code)

Thanks!

-Nick

59270 - Thanks!

Nick, my email is blownatmosphere (at) hotmail (dot) com, please email me a price quote for a 12" d1 recone, plus exact shipping of the reconed sub to 48430.

Thanks,

Matt

Don't know how much the motor weighs off the top of my head so i can't do a 'shipped' price until tomorrow when I get in touch with Scott. 12" recone with basket and everything is $108 plus shipping.

Thanks!

-Nick

Nick, did you find out how much the motor weighs? Iirc it was 42 lbs when I shipped it out.

Also, this is a pretty important question because I am moving in exactly 1 month. If I were able to send PP as of, say tomorrow, will I receive the sub within 3 weeks? Should I just wait until after I move?

Thanks man.

Your call, if it's easier for you to wait then that is best. Just so happens if a UPS claim would come into the equation if I were you I would probably wait. Granted we've only had 1 package get destroyed in a little over 2 years, but anything is possible I guess...

Your call man. I need to find the weight out, forgot when I talked to Scott earlier today.

Your call, if it's easier for you to wait then that is best. Just so happens if a UPS claim would come into the equation if I were you I would probably wait. Granted we've only had 1 package get destroyed in a little over 2 years, but anything is possible I guess...

Your call man. I need to find the weight out, forgot when I talked to Scott earlier today.

Right on, I just don't want the sub to show up to a place I no longer reside at.. ya dig? Unless you can guarantee a 2-3 week turn around, I think I'll just wait a week or so before I move and give you the new address.

Ttt for shipping weight and knowing the cost of an 15 and 18" D1 recone.

Thanks, Nick!

Matt

ditto for shipping quote for (1) XT15f recone to 59270

Dual 1.4's

Edited June 30, 200817 yr by redlineaudio

Nick, I am most likely going with an 18".. So if you found out how much the motor weighs, then quote me for an 18" shipped to 48430.

Thanks,

Matt