Posted March 11, 200718 yr this amp does over 800rms from 4-1ohm making it VERY versatile. it's small and can fit all over, it has SICK on board xovers/subsonic, 24dB per octave I believe, built in cooling fan. just over built in general and a sick amp. I always see people going with other amps because they just don't know what they're missing... see the vid in my sig of one x600.1 pushing a single DD 9510F and tell me another budget 600watt amp that'll do that.. I'll propmtly reply with a good smiley from another forum
March 12, 200718 yr Admin It is a great amp, I dont understand the reason behind killing off the Xenon line.
March 13, 200718 yr I love my Xenon 200.2 and 100.4 for my front stage... Too bad they didnt make a big amp for my substage
March 14, 200718 yr You might be able to find a X1200 floating around out there.I know, but I'd want to run at least a couple, if not 3 or 4
March 14, 200718 yr They are great amps, but I was told by a friend with Carver that there was a conflict between PG w/ their Xenon line and JL Audio w/ their R.I.P.S trademark.
March 14, 200718 yr A couple. Ill probably just end up getting an Orion 2500D, talk about cheap power!
March 15, 200718 yr Admin A couple. Ill probably just end up getting an Orion 2500D, talk about cheap power!I think it is one of the better sub stage amps I have had. I use it now for all my testing.
March 16, 200718 yr Author They are great amps, but I was told by a friend with Carver that there was a conflict between PG w/ their Xenon line and JL Audio w/ their R.I.P.S trademark.then they should have removed the xeLoad since the amps do WAY sick power without it, and just make them stable to run 1.3ohms without xeload and a pair of strapped x1200.1ds would DESTROY An orion 2500d thanks... output would just be wasted... and as far as quality lol I won't even get into that... I sold my hcca5000d locally for $450 bnib.. my 1200d I still have and use.. but I prefer the x600.1 over it. and my old xtrpro 2400d... I'd WAY rather have a pair of x1200.1's over... 4ohm per they'd be better lol. and yes there is a way to strap them before anyone opens their mouth that doesn't know what they're talking about... it takes a module which has been available for years before the xenon's came out... and a pair of 1200s will do alot more that 2400rms we'll leave it at that and my 141.9@34hz is from a jetta trunk legal new TL off a single x600.1 with the bypass done via switch in speaker + lead. it gained a little over a dB I think... don't remember didn't test with xeload in a long time lol... I'm running it 2ohms so after imp rise I'm probably 4ohm or higher... so it'll still see only 800ish rms or less but I don't want to load it lower incase it cooks.. but it definetly does enough power imo lol Edited March 16, 200718 yr by HawaiianBassHead
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.