well im planning on buying a Fi Q 12" the thing id that i dont know if i have sufficient space... the car is a nissan Altima 2005. the measurments that i gos are... 30w x 14h x 14d i want to tunned at 30 or 32hz will that space be more than enough?? and if it is would be okay to put the amp on the box? (zx1000.1 kicker) thanks

well im planning on buying a Fi Q 12" the thing id that i dont know if i have sufficient space... the car is a nissan Altima 2005. the measurments that i gos are... 30w x 14h x 14d i want to tunned at 30 or 32hz will that space be more than enough?? and if it is would be okay to put the amp on the box? (zx1000.1 kicker) thanks

http://www.subwoofertools.com/forum/ported...mp;Fs=&CE=0

http://www.subwoofertools.com/forum/ported...mp;Fs=&CE=0

These are what i came up with...Seems the depth is a little too much for both the min and max. I, however am no expert in boxes and this is some basics...

And yes, you are ok to screw the amp to the box.

Edited March 22, 200718 yr by SilverBane

Have you considered a sealed box?

i really want a ported box, i tryed subwoofertools.com but i needit to be 30w 14h 17d wanted at least 2 cuft tunned to 30 or 32hz. i have an altima 2005 and want to fit it in the small part of the trunkm please tellme it will fit?

i really want a ported box, i tryed subwoofertools.com but i needit to be 30w 14h 17d wanted at least 2 cuft tunned to 30 or 32hz. i have an altima 2005 and want to fit it in the small part of the trunkm please tellme it will fit?

30 wide x 14 tall x 21 deep is 1.8cuft at 30Hz.

Edited March 23, 200718 yr by SilverBane

I have a friend with a Maxima and a 5 cube ported box?

i just built a box for a 12" q with a 25Hz tune. pete with team toxic base helped me out alot on it, the port tuning is vehicle dependent and any online calculator will significantly be different than how my box is built for the port. anyways, i fit it in 30x16x15 with a 6" round port and 2.8 cubes after displacements. teh 25Hz is freaking amazing...SQ out the arse

i just built a box for a 12" q with a 25Hz tune. pete with team toxic base helped me out alot on it, the port tuning is vehicle dependent and any online calculator will significantly be different than how my box is built for the port. anyways, i fit it in 30x16x15 with a 6" round port and 2.8 cubes after displacements. teh 25Hz is freaking amazing...SQ out the arse

Good suggestion on the round port. That is a nice way to get what he wants...

thanks for all the replies. the thing with my dimentions is that i want to fit the box in the back part of the trunk, so i can still use my trunk

i went to www.the12volt.com and this 29x14x14 made a 2.48 cuft box(3/4mdf). and there is a port calculator in there, but here is what i dont know is that made to calculate the pipe going inside the box? thanks

that doesn't take into account the displacement of the port or sub. if you want 2 cubes after displacements, then you could start with the 2.48 cube box and subtract your port from that (6" round would take up less space than slot ported would) and also the sub displacement. that should give you right around 2 cubes, which is what the Q wants to be happy.

thanks a lot

i started to do the plans for the box and is going really good, but i have to find pvc pipe for the port... a frined of mine told me that he saw a store that sells the ports with 2 feet of lenght so you can cut away what you dont want, but here is the thing he doesnt remember were he saw this any ideas of were can i find this? thanks

local hardware store or most plumbing supply stores....

i started to do the plans for the box and is going really good, but i have to find pvc pipe for the port... a frined of mine told me that he saw a store that sells the ports with 2 feet of lenght so you can cut away what you dont want, but here is the thing he doesnt remember were he saw this any ideas of were can i find this? thanks

I got mine from home depot, in 3 foot lengths its in a little stand in the pvc piping isle.