Posted April 29, 200718 yr I have an Xpress Capacitor(new) I'm trying to install and it's not quite working. I charged it correctly but when I measure it with a voltmeter, it only measures 3.5V I tried to install it anyways, hoping that it will charge the rest by itself. So I hooked it up right next to the amp. The digital readout doesn't display. I followed the instructions and it doesn't work. I asked a friend and he said I should try hooking up a remote wire to the cap. Any ideas?
April 29, 200718 yr Author That's called avoiding the question. Anyone else here that can help me? If I'm going to sell this cap, I need to make sure it works.
April 29, 200718 yr That's called giving good advice If you want to test it, just hook it up in parallel to the circuit.If you did that and you didn't get the readout to light, does the display have a remote wire that needs to be wired in to the switched 12V?
April 29, 200718 yr How do you check to see if something is working if by definition in the first place it never did anything?
April 30, 200718 yr Author If you did that and you didn't get the readout to light, does the display have a remote wire that needs to be wired in to the switched 12V?I will look for some type of a connection for the remote wire behind the digital readout display tomorrow. And if it does work,.. it'll most likely be used as a filter for my coaxials. And if it still doesn't work, I'll sell it as it is, which was brand new.
May 1, 200718 yr Some people swear by caps, others hate them. Personally I've never seen good results from one, besides looking fancy. I'd put in a small battery. Just my thoughts.My last cap needed a remote wire to turn on-like an amp, I'd do like they said and check you aren't missing something.
May 6, 200718 yr Author Some people swear by caps, others hate them. Personally I've never seen good results from one, besides looking fancy. I'd put in a small battery. Just my thoughts.My last cap needed a remote wire to turn on-like an amp, I'd do like they said and check you aren't missing something.You're right about the remote wire. I hooked the rem wire up to a golden colored screw behind the digital display. Now it shows the voltage. Odd that this information was excluded from the installation instructions. Anyways, like I said, I am using it since it's been sitting around doing nothing. Seems to filter the sound a little better for the fronts as I didn't bother hooking it up to the sub amp. Thanks for the help.
May 6, 200718 yr Some people swear by caps, others hate them. Personally I've never seen good results from one, besides looking fancy. I'd put in a small battery. Just my thoughts.My last cap needed a remote wire to turn on-like an amp, I'd do like they said and check you aren't missing something.You're right about the remote wire. I hooked the rem wire up to a golden colored screw behind the digital display. Now it shows the voltage. Odd that this information was excluded from the installation instructions. Anyways, like I said, I am using it since it's been sitting around doing nothing. Seems to filter the sound a little better for the fronts as I didn't bother hooking it up to the sub amp. Thanks for the help.*coughs, "bullchit"
May 12, 200718 yr drwang84, what you're experiencing is called "denial". You're tricking yourself into believing that it's doing something.
May 14, 200718 yr Ahh, capacitors...Unless you have a 40 farad powerbank, or unless you want to buffer voltage spikes in an SQ vehicle, the capacitor isn't gonna do much of anything but add some resistance to the system and MAYBE help out some small regulator lag, at best. A 1 farad capacitor will be depleted by a 500 watt amp in less than a second, and a lot of the power they hold isn't usable. Edited May 14, 200718 yr by greenflames10
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.