Posted July 3, 200718 yr Newly converted to FIcarudio products by xconcepts from caraudio i am wondering what is the min power requirement for the SSD's i will be replacing a pair JL Audio 10w3v2's in a sealed enlosure of 0.65 which are both being powered by a JL Audio 500/1 , and being unfermiliar with the FIcarudio subs , i'm wondering will a pair of 10 "SSD's work properly being connected and boxed the same way ??The Jl's were rated 300 W each , will the amp be sufficient for these two SSD's to perform properly ?Will also be adding a pair of 10 " 2 ohm BL's each connected individually to it's own Alpine PDX 1000.1 in a ported enclosure tuned at 32 , will add P chamfer , cooling , Flatwind , and universal , what do you guys think ??Dan
July 4, 200718 yr Newly converted to FIcarudio products by xconcepts from caraudio i am wondering what is the min power requirement for the SSD's i will be replacing a pair JL Audio 10w3v2's in a sealed enlosure of 0.65 which are both being powered by a JL Audio 500/1 , and being unfermiliar with the FIcarudio subs , i'm wondering will a pair of 10 "SSD's work properly being connected and boxed the same way ??The Jl's were rated 300 W each , will the amp be sufficient for these two SSD's to perform properly ?Will also be adding a pair of 10 " 2 ohm BL's each connected individually to it's own Alpine PDX 1000.1 in a ported enclosure tuned at 32 , will add P chamfer , cooling , Flatwind , and universal , what do you guys think ??DanI had 400watts each on mine at one time... sounded great.I recommend a 500/1 on each.I'd ask for them to be made with soft spiders, My 10's were... so they were able to make more use of the lower power....nG
July 4, 200718 yr Will also be adding a pair of 10 " 2 ohm BL's each connected individually to it's own Alpine PDX 1000.1 in a ported enclosure tuned at 32 , will add P chamfer , cooling , Flatwind , and universal , what do you guys think ??Why?
July 11, 200718 yr i am wondering what is the min power requirement for the SSD'sIf you want noise, 1 watt. Remember, below RMS does NOT damage the woofer AT ALL; clipping and distortion DOES.Also, what the HELL is with the 2 SSD's sealed and 2 BL's ported?!?!? Do NOT mix subwoofers AND box designs...you're going to get all kinds of cancellation. Edited July 11, 200718 yr by Big E
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.